Very strong hot melt adhesive Spaytec 430, 43mm, 10 kg

Code: PA.35.0042
€475,20 / package €392,70 excl. VAT Measure price:
in stock (2 package)
Delivery to:
20.11.2026
Delivery options

Spraytec 430 Very Strong Hot Melt Adhesive - 43mm, 10 kg Packaging

Detailed information

Product detailed description

Spraytec 430 Very Strong Hot Melt Adhesive - 43mm, 10 kg Packaging

Spraytec 430 is a very strong hot melt adhesive suitable for most materials, including otherwise difficult-to-bond polypropylene (PP).

The name Spraytec may suggest it is a spray adhesive, but this is not the case. Spraytec hot melt adhesives are extruded as a continuous bead, which is immediately converted into an infinite spiral by a series of air nozzles that create a vortex.

Benefits:

  • High Adhesion: very high initial tack allows for the use of a smaller amount of adhesive
  • No Waste: unused adhesive remaining in the gun remelts and can be used next time
  • Unlimited Shelf Life, Good Storage: adhesives do not smudge and can be stored without risk of expiration in small 10-unit boxes
  • No Waiting: the adhesive is ready for application immediately without waiting for the gun to heat up
  • Low Costs: Only a small amount is required to achieve a strong bond. Additionally, the adhesive does not suffer from excessive overspray
  • No Solvents: Adhesives contain no harmful chemicals or airborne substances, eliminating the need for any personal protective equipment
  • Better for the Environment and Your Employees: solvent-free, these adhesives are gentler on the environment and the health of your employees
  • No Packaging Disposal Issues: eliminates the need to dispose of hazardous aerosol cans containing residual solvents

For application, it is recommended to use one of our applicator guns:

Tec 6300-43 - Pneumatic Hot Melt Adhesive Gun, 43 mm

Tec 7300-43 - Pneumatic Hot Melt Adhesive Gun with Hopper, 43 mm Diameter

Additional parameters

Category: Hot melt adhesives and glue guns
colour: Brown
Opening hours: 5 minutes
Application surface: Wood, textile, Paper, Plastics including PP, Rubber, Foam
Type: Hot Melt Adhesive
Manufacturer: Power Adhesive
Viscosity: Medium
Point Application: Yes
Spray application: Yes

Spraytec Adhesive Range

Discussion

Be the first who will post an article to this item!

Do not fill out this field

Security check

Vložením komentáře souhlasíte s podmínkami ochrany osobních údajů