TESA 51134 200m
Code: AD.42.0002Product detailed description
TESA 51134 protective film, clear, for metal, wood, PVC, glass and ceramics, roll length 200m, thickness 0.080 mm
Usage
- aluminium, anodised
- steel
- zinc
- copper
- lacquered surface (acrylic or synthetic resin)
- lacquered wooden surfaces
- rigid PVC, including window and door frames
- architectural glass (not exposed to ultraviolet radiation)
- plastered surface
- faux stone surfaces
- ceramic surfaces of tiles and cladding
- synthetic fibre carpets (short pile)
Technical information
Surface protective films and tapes protect products from dirt, dust and damage during assembly, maintenance, warehousing and transport. The adhesive used has low adhesion, so the protective film or tape can not only be easily applied, but also removed without residue. 3M offers a wide product range of these films and tapes for a variety of applications.
Preparation
To achieve optimum adhesion, the substrate must be clean and free from dust, oil, grease, solvents, etc.
Usage
Apply and remove at temperatures between 10°C and 40°C.
Warehousing
Protective films and tapes should be stored at temperatures between 10°C and 40°C, and a relative humidity of 50%.
Application
Protects against scratching
Protects against the effects of dust, damage and abrasion
Protects surfaces during repairs, assembly, processing and shipping
Reduces factors contributing to surface ageing
Protects against colour fading caused by UV radiation
Extends the service life of the product
Protects the product during warehousing
Additional parameters
| Category: | Adhesive tapes |
|---|---|
| Application: | Aluminium, anodised, Ceramic Tile and Slab Surfaces, Synthetic Fibre Carpets (Short Pile), Lacquered wood surfaces, Lacquered surface (acrylic or synthetic resin), Copper, Steel, Plastered surface, Stone substitute surfaces, Architectural glass (not exposed to ultraviolet radiation), Rigid PVC, including window and door frames, Zinc |
| Thickness: | 0.08 mm |
| colour: | transparent |
| Carrier: | Polyethylene |
| Usage: | Protects surfaces during repairs, assembly, processing and shipping, Protects against colour fading caused by UV radiation, Protects against scratching, Protects against the effects of dust, damage and abrasion, Protects the product during warehousing, Reduces factors contributing to surface ageing, Extends the service life of the product |
| Adhesion to steel (N/cm): | 2,4 |
Discussion
Be the first who will post an article to this item!
