TC-2810 SCOTCH-WELD Thermally conductive epoxy adhesive 3M, 0.8-1.4 W/m-K, 50 ml
Code: 7100170986Product detailed description
3M SCOTCH-WELD TC-2810 - Thermally Conductive Epoxy Adhesive, 0.8-1.4 W/m-K, 50 ml
Product Description
3M™ TC-2810 Thermally Conductive Epoxy Adhesive is a high-performance, two-part thermally conductive epoxy adhesive
filler for good thermal conductivity with high adhesion.
3M™ TC-2810 Thermally Conductive Epoxy Adhesive is a high-performance, two-part thermally conductive epoxy adhesive
filler for good thermal conductivity with high adhesion.
Key features
• High adhesion
• Slight tack allows for pre-assembly
• Well-wetted surface
• Low viscosity for potting
• Good gap filling
• Thin bond line
• Good thermal conductivity (0.8-1.4 W/m-K)
• Low chloride (Cl) ion content and outgassing
• High adhesion
• Slight tack allows for pre-assembly
• Well-wetted surface
• Low viscosity for potting
• Good gap filling
• Thin bond line
• Good thermal conductivity (0.8-1.4 W/m-K)
• Low chloride (Cl) ion content and outgassing
Application
• LED assembly
• Thermally fixing battery cells and thermal management for EV/HEV batteries
• Potting applications
• General gap filling
• LED assembly
• Thermally fixing battery cells and thermal management for EV/HEV batteries
• Potting applications
• General gap filling
Application Techniques and Product Use
For bonding rigid and rigid parts, it is recommended that the bond line thickness and edge fill be designed to optimise:
1. Bond strength
2. Thermal resistance
Typical designed bond line is in the thickness range of 3-7 mil (0.076-0.18 mm)
For better thermal performance (lower thermal resistance), a thinner bond is recommended. A thinner bond line may reduce
bond strength, so every application must be tested to find the correct balance between thermal and mechanical properties.
For bonding rigid and rigid parts, it is recommended that the bond line thickness and edge fill be designed to optimise:
1. Bond strength
2. Thermal resistance
Typical designed bond line is in the thickness range of 3-7 mil (0.076-0.18 mm)
For better thermal performance (lower thermal resistance), a thinner bond is recommended. A thinner bond line may reduce
bond strength, so every application must be tested to find the correct balance between thermal and mechanical properties.
An EPX applicator gun and mixing nozzle are required for application, see the related tab.
Additional parameters
| Category: | Adhesives |
|---|---|
| EAN: | 08887862330573 |
| Application: | LED assembly, Thermally Fixed Battery Cell and Thermal Management for EV/HEV Battery, Watering Application, General gap filling |
| colour: | Cream |
| chemical resistance: | Excellent |
| UV resistance: | Excellent |
| moisture resistance: | Excellent |
| Shape: | Rigid Epoxy |
| Handling strength: | 4-6 hours |
| Joint type: | Permanent |
| Full curing time: | 48 hours |
| Application method: | EPX Applicator Guns |
| Opening hours: | 100-120 minutes |
| Aggregation: | Liquid |
Discussion
Be the first who will post an article to this item!
