SCOTCH-WELD SF100 20g excellent very fast cyanoacrylate adhesive with medium viscosity

Code: 7100034060
€18,70 / pcs €15,50 excl. VAT Measure price:
in stock (16 pcs)
Delivery to:
20.11.2026
Delivery options

Scotch-Weld SF100 - 20g, Excellent Fast Cyanoacrylate Adhesive, Medium Viscosity

Detailed information

Product detailed description

Scotch-Weld SF100 - 20g, Excellent Fast Cyanoacrylate Adhesive, Medium Viscosity

3M™ Scotch-Weld™ SF100 is an instant adhesive with low viscosity and fast curing of the bond. The curing speed of this cyanoacrylate adhesive is less dependent on surface moisture than that of conventional cyanoacrylates. It can be applied to various surfaces including leather, cork, wood, plastic and rubber.

Instant Adhesion Very fast instant adhesive 3M™ Scotch-Weld™ SF100 is designed to provide instant adhesion. Fast curing allows project workflows and high productivity to be maintained. Low viscosity allows for quick application and the creation of a thin layer that adheres to the surface within seconds. This fast-drying cyanoacrylate adhesive can be used for high-speed production lines where fast curing is required. Full curing of the bonded joint is typically achieved after 24 hours, although the curing process will be slower in environments with low humidity and low temperature. The adhesive properties of very fast instant adhesive 3M™ Scotch-Weld™ SF100 are maintained after curing within a temperature range of -53 °C to 82 °C. By applying lightweight pressure to the flexible tube, the adhesive can be applied precisely drop by drop, or a uniform layer of the required length and coverage can be applied by pressing the tube more firmly. Dispensing tips are used for precise application. Recommended use: Hard-to-bond plastics and rubber, acidic or contaminated surfaces, wood, cork, leather, cardboard, greasy surfaces. What are instant adhesives? Instant adhesives are strong, fast-drying adhesives based on cyanoacrylate for domestic and industrial use. Generally, it is an acrylate resin which, upon contact with water (specifically hydroxide ions), creates long and strong chains through rapid polymerisation, allowing the bonded surfaces to be joined together. Cyanoacrylates are sensitive to moisture. Excessive exposure to moisture can reduce the shelf life. Since moisture causes the adhesive to harden, normal air humidity is sufficient to create a thin surface layer within seconds, which visibly slows down the reactive curing process. For this reason, cyanoacrylate should be applied in a thin layer to allow for a rapid reaction and the formation of a strong bond within a reasonable time. 3M instant adhesives are applied directly from the tube and reach handling strength very quickly at room temperature. Just one drop per cm2 can bond a variety of plastics or rubber.

  • Fast curing allows project workflows and high productivity to be maintained.
  • By applying lightweight pressure to the flexible tube, the adhesive can be applied precisely drop by drop, or a uniform layer of the required length can be applied by pressing the tube more firmly. Due to low viscosity, a thin layer of adhesive can be created, which allows for fast and effective curing.
  • The adhesive can be applied to various surfaces including leather, cork, wood, plastic and rubber.
  • Dispensing tips ensuring precise application
  • Fast curing enabling rapid project implementation

Additional parameters

Category: Vehicle Repair and Paint Products
EAN: 04054596802292
Application: Bonding of paper and cardboard, Leather bonding, Rubber bonding, Bonding of plastic sheets (e.g. Forex), Bonding of rubber (except EPDM), Plastic bonding (ABS, PVC, acrylic glass), Bonding of wood and hardboard, Bonding of flexible foam (latex, urethane), Bonding of fabric, felt, cork and glass fibre
colour: Clear
area of application: Electronics, maintenance, Hobby, Repairs
chemical resistance: Very good
UV resistance: Very good
moisture resistance: Good
temperature resistance: -54°C to + 82°C
Shape: Ethyl Hybrid
Handling strength: 4-30 s
Shear strength: Steel 2109 psi, Stainless steel 2266 psi, Aluminium 1689 psi, ABS 914 psi, Polycarbonate 755 psi, PVC 1096 psi, Nylon 321 psi, Polypropylene 728 psi, Silicone 105 psi
Full curing time: 24 hours
Application method: Manual
Viscosity: 71 - 95 cP

Discussion

Be the first who will post an article to this item!

Do not fill out this field

Security check

Vložením komentáře souhlasíte s podmínkami ochrany osobních údajů