SCOTCH-WELD 847 3M 150 ml tube, very strong, fast-drying nitrile adhesive

Code: 7000000794
€17,60 / pcs €14,60 excl. VAT Measure price:
in stock (22 pcs)
Delivery to:
20.11.2026
Delivery options

3M Scotch-Weld 847 - 150 ml Tube, Very Strong, Fast-Drying Nitrile Adhesive

Detailed information

Product detailed description

3M SCOTCH-WELD 847 - 150 ml Tube, Very Strong, Fast-Drying Nitrile Adhesive

Bonds a wide range of substrates very quickly, including many plastics and rubbers, sealants and leather. Features excellent resistance to most fuels and oils. Reactivatable by heat and solvents. Heat curable.

Contents: 150 ml tube

system: solvent-based
base: nitrile rubber
temperature resistance: 80 °C
UV resistance: excellent
moisture resistance: excellent
chemical resistance: excellent
application: rolling, brushing, extruding (tube)

Instructions for use:

1. Surface preparation: Remove all dust, dirt, oil, grease, wax, loose coatings, etc. from the surface. Before bonding, clean the surface with a solvent, e.g. methyl ethyl ketone (MEK) or 3M™ citrus cleaner.*

2. Application temperature range: For best results, the temperature of the adhesive and bonded surfaces should be at least 18 °C

3. Use: Mix well before use. Porous surface(s): apply a uniform thin layer of adhesive to one or both surfaces by brush, pouring or spraying. It is better to apply the adhesive to both surfaces, as this ensures greater strength and a longer open time between application and bonding. Very absorbent materials may require more than one coat of adhesive. Bond both surfaces while the adhesive is still wet or highly tacky. Join both surfaces with strong pressure. Non-porous surface(s): apply a uniform thin layer of adhesive to both surfaces by brush, pouring or spraying. Allow the adhesive to dry until it is tacky. Join both surfaces with strong pressure.

4. Drying time: Drying time depends on temperature, humidity, airflow, and the porosity of the materials being bonded. Greater immediate strength can be achieved by reactivation using heat or solvents. See the following Reactivation section.

5. Reactivation: When reactivating using solvents, apply the adhesive to both surfaces. Allow the adhesive to dry until it is no longer tacky. Lightly clean one surface with a solvent, e.g. methyl ethyl ketone (MEK).* The bond will be fully set within 30 seconds. When reactivating using heat, apply the adhesive to both surfaces. Allow the adhesive to dry completely. Using heat, reactivate one or both surfaces to a minimum temperature of 82 °C. Join them immediately (while hot) and ensure the bond is secured with strong pressure.

6. Curing: 3M™ Scotch-Weld™ Liquid Adhesives 847 can be cured to achieve better physical properties. Cure the bonded parts at the specified time and temperature while maintaining pressure on the bond line.

7. Cleaning: Excess adhesive can be removed with a solvent, e.g. methyl ethyl ketone (MEK) or acetone, preferably while the adhesive is still wet.* *When working with solvents, extinguish all ignition sources, including open flames, and follow the manufacturer's instructions for use and safety precautions.

Additional parameters

Category: Adhesives
EAN: 21200197185
Application: Bonds leather, nitrile rubber, most plastics and sealing materials to a wide variety of substrates, Used in the electronics, radio, and television industry
colour: Dark brown
chemical resistance: Excellent
UV resistance: Excellent
moisture resistance: Excellent
temperature resistance: -30°C to 80°C
Shape: Nitrile rubber
Joint type: Permanent
Application method: With a roller or brush
Special feature: Heat-reactivatable
Flammable fuel: Yes
Flammable solvents: Yes
Aggregation: Liquid
Yield: 7 m2 per litre
Appearance/Odour: Dark brown / Solvent odour
Base material: Nitrile rubber

Discussion

Be the first who will post an article to this item!

Do not fill out this field

Security check

Vložením komentáře souhlasíte s podmínkami ochrany osobních údajů