PN05916 3M Mechanical protection against sparks and spatter

Code: 7000045694
€215,10 / pcs €177,80 excl. VAT Measure price:
2 weeks
Delivery to:
9.12.2026
Delivery options

PN05916 3M Mechanical protection against sparks and spatter

Detailed information

Product detailed description

PN05916 3M Mechanical protection against sparks and spatter

  • This material helps protect vertical surfaces from sparks and spatter
  • Recommended for all welding or sanding
  • The self-adhesive layer allows for easy installation
  • Repositionable to allow for adjustments and reuse
  • Can be easily cut to the required size for the repair

3M Mechanical Surface Protection helps protect surfaces from damage caused by welding spatter and sanding sparks. Our self-extinguishing material is self-adhesive for easy application to vertical surfaces. The adhesive backing allows for easy repositioning as needed at the workplace.

3M Mechanical Surface Protection protects vertical surfaces from sparks and spatter generated during welding or sanding. This self-extinguishing material is self-adhesive for easy application to vertical surfaces. The adhesive facilitates repositioning or removal of the material as needed. The same material can be used for various locations as required during operation. This material is recommended for the protection of automotive glass, painted panels, car lights and many other vertical surfaces. It is recommended to use this material to protect against the possible need to replace automotive parts due to spatter and sparks. The material can be cut to the required size to suit the specific type of repair. *Note: This product is not intended for installation on horizontal surfaces, e.g. roofs, boot lids, bonnets, car floor mats. It is not intended to prevent heat transfer from sparks or spatter. If they remain on the paper in one spot, they will burn through. For horizontal surfaces or any areas where sparks remain on the surface until they cool, the use of a high-efficiency 3M™ welding blanket (PN 05919) is recommended. If sparks remain on a horizontal surface, it may lead to burn-through or damage to the protected area.

3M™ Mechanical Surface Protection protects vertical surfaces from sparks and spatter generated during welding or sanding. This self-extinguishing material is self-adhesive for easy application to vertical surfaces. The adhesive facilitates repositioning or removal of the material as needed. The same material can be used for various locations as required during operation. This material is recommended for the protection of automotive glass, painted panels, car lights and many other vertical surfaces. It is recommended to use this material to protect against the possible need to replace automotive parts due to spatter and sparks. The material can be cut to the required size to suit the specific type of repair. *Note: This product is not intended for installation on horizontal surfaces, e.g. roofs, boot lids, bonnets, car floor mats. It is not intended to prevent heat transfer from sparks or spatter. If they remain on the paper in one spot, they will burn through. For horizontal surfaces or any areas where sparks remain on the surface until they cool, the use of a high-efficiency 3M™ welding blanket (PN 05919) is recommended. If sparks remain on a horizontal surface, it may lead to burn-through or damage to the protected area.

Additional parameters

Category: Other Products
EAN: 00051131059160
Application: Surface Protection, Sanding of Welds, welding, Weld Preparation
Product Type: Masking Paper
Product colour: Brown
Total length: 45.7 m
Overall width: 609 mm

Discussion

Be the first who will post an article to this item!

Do not fill out this field

Security check

Vložením komentáře souhlasíte s podmínkami ochrany osobních údajů