Hot melt packaging adhesive Tecbond 14, 12 mm, 5 kg
Code: PA.35.0051Product detailed description
Tecbond 14 Packaging Hot Melt Adhesive for Bonding Packaging Materials - 12mm, 5kg
Tecbond 14 is a very fast-setting packaging adhesive designed for use on most paper and cardboard substrates. It is ideal for sealing cardboard boxes and forming trays. An ideal choice for special packaging, points of sale and packaging cardboard.
The composition of the adhesive maximises the dispense rate and sets very quickly after compression. Thanks to these two properties, packaging can be secured in a fraction of the time compared to bonding with tape or stapling. Materials also do not need to be held in place, as the bonding is almost instantaneous. The adhesive strength of the adhesive provides the cardboard with structural strength, allowing the packaging material to be thin without compromising its rigidity. The low viscosity of the Tecbond 14 adhesive improves gun performance, limits runoff and ensures a tight and strong joint on many types of cardboard surfaces.
Benefits:
- ensures a tight and strong joint
- no chemical odour
- faster application compared to tapes and staplers
- eliminates the noise generated when applying tape
- does not disrupt the design of the packaging itself
- strong joint within a few seconds
At lower temperatures, the setting speed of the adhesive increases and the open time is reduced.
For application, it is recommended to use one of our applicator guns with a 12mm diameter:
Tec 806-12 Low Melt Hot Glue Gun - 12 mm Hot Melt Adhesive, Corded Power
Tec 820-12 Hot Melt Adhesive Gun - 12mm, Thermostat, Corded Power
B-tec 808-12 Hot Melt Hot Glue Gun - 12 mm Hot Melt Adhesive, Battery Powered
Additional parameters
| Category: | Hot melt adhesives and glue guns |
|---|---|
| Application: | Cardboard bonding, Sample bonding |
| colour: | Amber |
| Melting temperature: | 160°C -195°C |
| Adhesive: | Synthetic polymer |
| Application surface: | Wood, Paper, Cardboard, Foam |
| Type: | Hot Melt Adhesive |
| Manufacturer: | Power Adhesive |
| Viscosity: | Small |
| Hot Melt: | Yes |
| Low Melt: | No |
| Diameter: | 12 mm |
| Heat resistance: | 85°C |
| working time: | 30 seconds |
| Flexible: | No |
Packaging using hot melt adhesive
Discussion
Be the first who will post an article to this item!
