Hot melt assembly adhesive Tecbond 280 for low temperatures, 15mm, 5kg
Code: PA.35.0032Product detailed description
Tecbond 280 Hot Melt Mounting Adhesive - 15 mm, 5 kg Packaging
Tecbond 280 adhesive is based on the latest raw material technology and is designed to have a longer open time than other structural adhesives.
This means that after initial compression, parts can be adjusted for up to three minutes before the adhesive sets and forms an exceptionally strong bond. This makes Tecbond 280 adhesive ideal for applications where it may be necessary to briefly change the position of materials after the initial bond is created.
Along with a sufficiently long service life, Tecbond 280 provides a strong yet flexible bond down to temperatures of -20 °C. This flexibility allows for material movement (such as thermal expansion of floor coverings) without compromising the strength of the bond.
The adhesive provides excellent adhesion to wood, metal, glass, ceramics, concrete and most plastics. Tecbond 280 adhesive can be used on difficult-to-bond materials, such as heat-sensitive plastics, thanks to the possibility of application at lower temperatures using a Low melt glue gun (use a Hot melt glue gun to achieve maximum adhesion).
Thanks to its extremely long durability and the possibility of clean operation, Tecbond 280 adhesive creates practically zero waste. It is non-toxic, requires no mixing, is mess-free during application and does not require long drying times. Unused adhesive remaining in the applicator can be remelted and used when the gun is next switched on.
Benefits:
- extremely long durability
- flexible and strong bond down to -20 °C
- unused adhesive can be reused later
At lower temperatures, the setting speed of the adhesive increases and the open time is reduced.
For application, it is recommended to use one of our applicator guns:
Tec 806-15 Hot Melt - Hot Melt Glue Stick Gun 15 mm, Corded
Tec 806-15 Low Melt - Hot Melt Glue Stick Gun 15 mm, Corded
Tec 820-15 - Hot Melt Adhesive Gun 15 mm with Thermostat, Corded
B-tec 808-15 Hot Melt - Hot Melt Adhesive Gun 15 mm, Battery Powered
3M Hot Melt Applicator TC/TC-Q, 220V, Gen II
3M Hot Melt Applicator TC/TC-Q LT, 220V, Gen II Low Melt with reduced melting temperature
Additional parameters
| Category: | Hot melt adhesives and glue guns |
|---|---|
| colour: | Light Brown |
| Handling strength: | up to 3 minutes |
| Melting temperature: | 195°C |
| Adhesive: | Synthetic polymer |
| Application surface: | glass, Wood, stone, Plastics other than PP and PE, concrete, metal, Brick |
| Type: | Hot Melt Adhesive |
| Manufacturer: | Power Adhesive |
| Viscosity: | Medium |
| Hot Melt: | Yes |
| Low Melt: | Yes |
| Diameter: | 15 mm |
Tecbond 280
Discussion
Be the first who will post an article to this item!
