Hot melt assembly adhesive Tackfix 48, 12 mm, 20 sticks
Code: PA.35.0027Product detailed description
Tackfix 48 Hot Melt Mounting Adhesive for Professionals - 12mm, 20 Stick Packaging
Tackfix mounting adhesive is a fast and easy alternative to nailing carpet gripper strips, laying tiles, and starting strips for wooden floors. It offers flexibility while allowing for short-term repositioning of the floor covering before a permanent bond is formed.
Advantages
- Strong, but flexible bonds: strong, flexible, shock-resistant bonds on various surfaces, which still allow for expansion and movement of the floor covering
- Fast Application and Curing: The adhesive is easily applied using a tec glue gun and cures completely within one minute after pressing the parts together
- Economical, easy and clean use: non-toxic tackfix adhesive has an unlimited shelf life, requires no mixing, leaves no mess during application, and does not require long drying times. Adhesive remaining in the gun can be used during subsequent power-ups, reducing the possibility of waste
- Excellent appearance: tackfix adhesive is applied to the underside of the flooring material, so it does not affect the appearance
- Bonded material temperature: The adhesive can be applied even at low temperatures
At lower temperatures, the curing speed of the adhesive increases and the open time is shortened
For application, it is recommended to use one of our applicator guns with a 12mm diameter:
Tec 806-12 Low Melt Hot Glue Gun - 12 mm Hot Melt Adhesive, Corded Power
Tec 820-12 Hot Melt Adhesive Gun - 12mm, Thermostat, Corded Power
B-tec 808-12 Hot Melt Hot Glue Gun - 12 mm Hot Melt Adhesive, Battery Powered
Additional parameters
| Category: | Hot melt adhesives and glue guns |
|---|---|
| Application: | Sealing, Potting and Encapsulation of Electronics, Large Area Lamination Assembly, Joining with small joints, Mounting and Trim, Tile bonding |
| colour: | transparent |
| Melting temperature: | 195˚C |
| Adhesive: | Acrylic |
| Application surface: | ceramics, Wood, stone, Plastics other than PP and PE, Paving, metal, Brick, Cement |
| Type: | Hot Melt Adhesive |
| Manufacturer: | Power Adhesive |
| Viscosity: | High |
| Hot Melt: | Yes |
| Diameter: | 12 mm |
| working time: | up to 50 seconds |
| Compatible with applicators: | Hot melt |
| The item has been sold out… | |
Tackfix Instructional Video
Discussion
Be the first who will post an article to this item!
