Hot melt adhesive for foam materials Spraytec 425, 43mm, 10kg
Code: PA.35.0043Product detailed description
Spraytec 425 Hot Melt Adhesive For Foam Materials - 43mm Diameter, 10kg Packaging
Spraytec 425 hot melt adhesive offers exceptional durability and a long open time. It is ideal for product assembly and production applications where bonding a large area or a long open time is required.
Spraytech 425 is brown in colour and offers an open time of up to 3 minutes, depending on environmental conditions and the temperature of the materials.
The name Spraytec may suggest it is a spray adhesive, but this is not the case. Spraytec hot melt adhesives are extruded as a continuous bead, which is immediately converted into an infinite spiral by a series of air nozzles that create a vortex.
At lower temperatures, the setting speed of the adhesive increases and the open time is reduced.
Benefits:
- High Adhesion: very high initial tack allows for the use of a smaller amount of adhesive
- No Waste: unused adhesive remaining in the gun remelts and can be used next time
- Unlimited Shelf Life, Good Storage: adhesives do not smudge and can be stored without risk of expiration in small 10-unit boxes
- No Waiting: the adhesive is ready for application immediately without waiting for the gun to heat up
- Low Costs: Only a small amount is required to achieve a strong bond. Additionally, the adhesive does not suffer from excessive overspray
- No Solvents: Adhesives contain no harmful chemicals or airborne substances, eliminating the need for any personal protective equipment
- Better for the Environment and Your Employees: solvent-free, these adhesives are gentler on the environment and the health of your employees
- No Packaging Disposal Issues: eliminates the need to dispose of hazardous aerosol cans containing residual solvents
For application, it is recommended to use one of our pneumatic application guns:
Tec 6300-43 - Pneumatic Hot Melt Adhesive Gun, 43 mm
Tec 7300-43 - Pneumatic Hot Melt Adhesive Gun with Hopper, 43 mm Diameter
Additional parameters
| Category: | Hot melt adhesives and glue guns |
|---|---|
| Application: | Bonding of foam materials, Mattress bonding |
| colour: | Brown |
| temperature resistance: | -15°C to + 80°C |
| Opening hours: | 3 minutes |
| Application surface: | Wood, Plastics other than PP and PE, concrete, Foam |
| Type: | Hot Melt Adhesive |
| Manufacturer: | Power Adhesive |
| Viscosity: | Low |
| Point Application: | Yes |
| Spray application: | Yes |
Spraytec Adhesive Range
Discussion
Be the first who will post an article to this item!
