G210300 Meguiar's Hybrid Paint Coating - premium, extremely durable paint protection (coating) based on polysiloxanes
Code: G210300Product detailed description
Meguiar's Hybrid Paint Coating G210300 - Top-Tier, Extremely Durable Polysiloxane-Based Paint Protection
Meguiar's Hybrid Paint Coating is a protective coating for your car's paint that combines the best of traditional ceramic paint coatings with unique hybrid polysiloxane technology. The result? One of our currently most chemically durable and longest-lasting paint protection products, which is incredibly easy to apply to your car.
- Protection for up to 1+ year*.
- Professional level of paint protection that is very easy to apply — any enthusiast can manage it!
- TrueCure Cross Linking Technology - a protection technology that bonds to the paint and to itself to provide perfect, durable protection against chemical contaminants and the environment.
- Extreme hydrophobicity - Creates a highly smooth surface with excellent water-repellent properties, which facilitate washing and drying and provide a so-called "paint self-cleaning" effect.
TrueCure Cross-Linking technology ensures chemical resistance, long-term durability of the protection, and leaves the paint surface perfectly smooth and highly hydrophobic after application. The result is a professional level of protection that provides you with the benefits of a ceramic paint coating without the need for high application costs.
Preparation before application:
- DO NOT APPLY MEGUIAR’S HYBRID PAINT COATING TO MATTE PAINTS.
- Always work in the shade and on a surface that is cool to the touch.
- Step 1 - WASHING: Thoroughly wash the vehicle using a pH-balanced car shampoo, e.g. Meguiar’s® Gold Class™ Car Wash Shampoo. Dry the entire vehicle thoroughly, paying close attention to thorough cleaning and drying of gaps and crevices, which can hold dust, dirt and other contaminants.
- PRO TIP: A smooth, clean and polished paint surface is essential for maximum durability and performance of the coating.
- Step 2 – REMOVE SURFACE CONTAMINANTS: Run your open palm over the washed and dried paint surface. If it is perfectly smooth, you can skip this step. If the paint is not smooth and you feel small bumps, the Meguiar’s® Smooth Surface™ Clay Kit is exactly what you need for the gentle removal of these surface impurities.
- *Step 3 – DEFECT REMOVAL / PAINT CORRECTION: *This step is optional, but strongly recommended for maximum gloss and coating performance. A smooth, polished surface significantly increases the ability of the coating to adhere to the paint. Use Meguiar’s® Ultimate Compound to remove sub-surface defects such as scratches, holograms, etc.
- Step 4 - FINAL PREPARATION: Thoroughly remove all residues of polish and polishing oils from the paint using Meguiar’s® M122 Surface Prep. Lightly spray M122 onto a 75 x 75 cm area, allow it to act for 1 minute, and then wipe it off using a microfibre wipe. Repeat this process over the entire vehicle and ensure that the entire paint surface is clean, degreased, and ready for the coating application.
Applying Meguiar's Hybrid Paint Coating:
- APPLICATION: (Do not apply at temperatures below 15°C). Spray Hybrid Paint Coating directly onto the applicator for 3 seconds, evenly across its entire surface. Place the applicator with the sprayed side onto the paint and spread the coating using a cross-hatch pattern with 50% overlap of individual strokes to ensure complete coverage of a section with dimensions of 50 x 50 cm. Repeat this process until the coating is applied to one body panel, e.g. a door.
- WIPING: After applying the coating to the entire panel, immediately wipe off the residue using the provided microfibre wipe folded in half twice. Using small circular motions, wipe the residue off the body panel, turn to a clean side of the wipe, and perform a final wipe. At temperatures below 23°C, allow the product to act for 1 minute before wiping.
- Repeat this process to apply the protection to the entire vehicle.
- If streaks or oily residues remain on the paint, replace the microfibre wipe with another clean and dry one and wipe the section once more. Clean and dry wipes are very important for the correct application and wiping of the coating. After application to the entire vehicle, discard the used wipes as they lose their absorbent properties.
- Optional step: A second layer can be applied 1 hour after wiping the previous layer to ensure no spots were missed. Use clean microfibre wipes again for the second layer.
- DO NOT EXPOSE THE VEHICLE TO WATER FOR THE FIRST 24 HOURS.
Application
Discussion
Be the first who will post an article to this item!
