DP8410NS SCOTCH-WELD 3M green impact-resistant adhesive for bonding plastics, 45 ml
Code: 7100024055Product detailed description
impact toughness. This toughened adhesive provides high adhesion to many plastics and metals, including slightly oily surfaces. It features rapid
curing, achieving structural strength within a few minutes.
The adhesive is intended for high surface energy (HSE) surfaces: unpainted metals, glass, wood, stone, ceramics, and also for medium surface energy (MSE): metals painted with non-baked colours, plastics except LSE (PE, PP).
- Durable final bond with excellent shear and high impact resistance
- Bonds difficult surfaces, such as powder-coated coatings and oily surfaces
- Fast adhesion reduces waiting time and maximises work efficiency
- High strength, simple plastic connection
- Glass spacer bead technology to control the thickness of the bonded joint and achieve consistent quality
Temperature resistance: -30°C to +149°C
Application using EPX dispensing pliers.
An EPX applicator gun, mixing nozzle and plunger for a 10:1 mixing ratio are required for application; see the related tab.
For small applications where you do not wish to purchase an applicator gun, you may simply order the adhesive and a plunger for dispensing the adhesive. After dispensing the adhesive using the plunger, manually mix both components in a clean container and apply using a brush, spatula or other tool.
Non-sag adhesion with excellent impact resistance acrylic adhesive 3M™ Scotch-Weld™ 8410NS is a non-sag acrylic adhesive with a 10:1 mixing ratio. It has a working time of 10 minutes, allowing for the positioning of substrates and objects before bonding. This working time and the length of the curing time can be altered using heat to increase or decrease the curing time. After full curing, this adhesive reaches a shear strength value of 1000 psi overlap in approximately 25 minutes, increasing throughput and work productivity, and is characterised by high peel and impact strength. Full curing will be achieved within 24 hours. Due to its non-sag properties, you can be sure that the adhesive is applied exactly where you want it and will not migrate during application or bonding processes. 3M™ Scotch-Weld™ acrylic-based adhesive 8410NS adheres well to many different materials, including most plastics, metals and oily surfaces. The joint created by this adhesive is durable and has high shear strength and impact resistance. Recommended applications: Various applications in the transport industry, such as bonding metal foils to metal frames, assembly of composite cabins, frame assembly, bonding of floor panels, bonding of exterior panels and bonding of roofs. Metalworking applications. Bonding of plastics and composites. Production of signs and display boards, such as bonding panels into frames, attaching ornaments and cutouts, bonding letters, frame assembly and seam sealing. Applications within HVAC systems, such as attaching floor panels and drain trays to frames, attaching to side walls or bonding reinforcing elements into panels. Bonding of slightly oily surfaces. Easy adhesion with acrylics. Acrylic-based adhesives are two-part adhesives ensuring excellent strength and bond durability, although in some situations slightly lower than epoxy adhesives. However, they possess certain properties that make them more suitable for use. These include a much faster curing speed, higher tolerance for oily or unprepared bonding surfaces, and the ability to bond a wide range of materials, including almost all plastics. Modern formulations of acrylic-based adhesives are stable at room temperature and have a long shelf life.
Additional parameters
| Category: | Adhesives |
|---|---|
| EAN: | 51115709944 |
| Application: | Metal Bonding, Bonding of lightly greasy surfaces, Bonding of plastics except PP and PE |
| colour: | Green |
| area of application: | General Industry, Metalworking, Special Vehicles, maintenance |
| chemical resistance: | Excellent |
| UV resistance: | Excellent |
| moisture resistance: | Excellent |
| temperature resistance: | -30°C to +149°C |
| Shape: | Acrylic |
| Handling strength: | 25 minutes |
| Shear strength: | ABS 1100 psi, Polystyrene 500 psi, PVC 1900 psi, Acrylic 1200 psi, Carbon Fibre Reinforced Epoxy - 4500 psi, Aluminium 4100 psi, Stainless Steel 3600 psi, Fibreglass reinforced polyester (ground) 1100 psi, Polycarbonate 1500 psi |
| Application method: | EPX Applicator Guns |
| Opening hours: | 10 minutes |
| Peel strength at 24°C: | 89 N/cm |
| Shear strength at -55°C: | 25 MPa |
| Shear strength at 24°C: | 28 MPa |
| Shear strength at 82°C: | 6 MPa |
| mixing ratio: | 10:1 |
Video
Discussion
Be the first who will post an article to this item!
