DP8407 SCOTCH-WELD 3M excellent grey adhesive for metal bonding, 490 ml
Code: 7100179480Product detailed description
3M Scotch-Weld DP8407 - Gray Metal Bonding Adhesive, 490 ml
3M™ Scotch-Weld™ DP8407NS Gray acrylic-based adhesive for metal bonding is a high-performance two-component acrylic-based adhesive with excellent shear strength, peel resistance, and good impact toughness. This toughened adhesive features excellent adhesion to many types of plastics and metals, including slightly oily surfaces. Its special formulation ensures extraordinary strength of bonded joints on metal substrates (including raw steel, copper, brass, bronze, and galvanized steel), even at high temperatures and in humid environments.
- Excellent strength and durability of bonded joints on active metals, plastics, and other materials
- Toughened adhesive
- Excellent peel strength and impact resistance
- Mixing ratio 10:1
- Increased curing speed when applied with heat
- Contains glass beads with a diameter of 0.3mm to achieve a uniform adhesive layer thickness
Application using EPX dispensing pliers.
An EPX applicator gun, mixing nozzle and plunger for a 10:1 mixing ratio are required for application; see the related tab.
For small applications where you do not wish to purchase an applicator gun, you may simply order the adhesive and a plunger for dispensing the adhesive. After dispensing the adhesive using the plunger, manually mix both components in a clean container and apply using a brush, spatula or other tool.
Additional parameters
| Category: | Adhesives |
|---|---|
| EAN: | 00638060146439 |
| Application: | Metal Bonding, Metal bonding including powder colour, Bonding of raw steel, copper, brass, bronze and galvanized steel |
| colour: | Grey |
| area of application: | General Industry, Metalworking, maintenance |
| chemical resistance: | Excellent |
| UV resistance: | Excellent |
| moisture resistance: | Excellent |
| temperature resistance: | -30°C to +149°C |
| Shape: | Acrylic |
| Handling strength: | 22–26 minutes |
| Shear strength: | ABS 1000 psi, Acrylic 1600 psi, Epoxy Resin (Fibre Reinforced) 4100 psi, Galvanised Steel 3400 psi, Aluminium (tested at -40 °C) 3400 psi, Aluminium (tested at a temperature of 82.22 °C) 1400 psi, Aluminium 4500 psi, Copper 1900 psi, Brass 1700 psi, Stainless Steel 3800 psi, Cold Rolled Steel 3500 psi, Polyester (fibre-reinforced) 1300 psi, Polycarbonate 1100 psi, Polystyrene 450 psi, PVC 1900 psi |
| Full curing time: | 48 hours |
| Application method: | EPX Applicator Guns |
| Opening hours: | 5–7 minutes |
| The item has been sold out… | |
Introduction to 3M™ Metal Bonder DP8407 NS
Discussion
Be the first who will post an article to this item!
