DP8405NS SCOTCH-WELD 3M green adhesive for plastic bonding, 45 ml
Code: 7100009688Product detailed description
3M™ Scotch-Weld™ DP8405NS are high-performance two-part acrylic-based adhesives that offer excellent shear bond strength, adhesion strength and impact toughness. The adhesive is not suitable for bonding plastics with low surface energy (PP, PE).
These toughened adhesives provide high adhesion to many plastics and metals, including slightly oily surfaces. They feature fast curing, achieving structural strength within a few minutes.
• Toughened adhesive
• Working time approx. 4 minutes
• Excellent impact strength
• Structural strength within approx. 19 minutes
• Extraordinary peel strength and impact resistance
• Increased curing speed when heat is applied
• Mixing ratio 10:1
• Contains glass beads (diameter 0.010”) to achieve a uniform adhesive layer
Temperature resistance: -40°C to +149°C
Application using EPX dispensing pliers.
An EPX applicator gun, mixing nozzle and plunger for a 10:1 mixing ratio are required for application; see the related tab.
For small applications where you do not wish to purchase an applicator gun, you may simply order the adhesive and a plunger for dispensing the adhesive. After dispensing the adhesive using the plunger, manually mix both components in a clean container and apply using a brush, spatula or other tool.
Additional parameters
| Category: | Adhesives |
|---|---|
| EAN: | 51115689635 |
| Application: | Metal Bonding, Bonding of lightly greasy surfaces, Bonding of plastics except PP and PE |
| colour: | Green |
| area of application: | General Industry, Metalworking, Special Vehicles, maintenance |
| chemical resistance: | Very good |
| UV resistance: | Excellent |
| moisture resistance: | Excellent |
| temperature resistance: | -30°C to +149°C |
| Shape: | Acrylic |
| Handling strength: | 16 minutes |
| Shear strength: | ABS 1100 psi, Acrylic 1300 psi, Carbon Fibre Reinforced Epoxy 4300 psi, Aluminium 4400 psi, Stainless Steel 3700 psi, Fibreglass Reinforced Polyester (ground) 750 psi, Polycarbonate 1200 psi, Polystyrene 500 psi, PVC 1800 psi |
| Application method: | EPX Applicator Guns |
| Opening hours: | 4 minutes |
| tensile strength: | 2800 psi |
| Peel strength at 24°C: | 89 N/cm |
| Shear strength at -55°C: | 18 MPa |
| Shear strength at 24°C: | 28 MPa |
| Shear strength at 82°C: | 6 MPa |
| mixing ratio: | 10:1 |
3M's Next Generation Structural Acrylic Adhesives
Adhesives and Sealants / 3M 2K STAR Acrylic, How to use the applicator gun
Discussion
Be the first who will post an article to this item!
