DP810 3M Scotch-Weld low odour acrylic adhesive, colourless, 400 ml
Code: 7100200483Product detailed description
3M Scotch-Weld DP810 Acrylic Adhesive - Low Odour, Clear, 400 ml
- Low-odour adhesive suitable for environments where unpleasant vapours or flammability pose a problem
- High peel strength, shear strength, and impact resistance due to significant toughness
- Can be bonded to oiled metals with minimal surface preparation
- 400 ml cartridge
3M™ Scotch-Weld™ DP810 low-odour acrylic adhesive is a toughened, two-part acrylic adhesive that cures at room temperature, specifically designed for bonding oiled metals, plastics and other surfaces. Thanks to its low odour and non-flammable properties, 3M™ Scotch-Weld™ DP810 acrylic adhesive helps create a safer working environment compared to conventional acrylic adhesives.
When using the adhesive in Duo Pak packaging, use a 3M applicator to ensure easy and precise metering, mixing and application. High peel and shear strength and impact resistance due to significant toughness. This unique acrylic offers you high peel and shear strength and durability thanks to good impact resistance, thus meeting the requirements for end-use in demanding conditions. Increased safety, speed and efficiency of work – these are just a few of the many advantages of 3M™ Scotch-Weld™ DP810 low-odour acrylic adhesive. It can be bonded to various substrates, such as metals, composites and a range of plastics including nylon. This acrylic adhesive cures to a light brown or black colour. Recommended use: Sporting goods (bonding metal to metal or metal to plastic), appliance production (bonding metal to metal or metal to glass), assembly of electronic device covers. Working time up to 10 minutes and handling strength after 20 minutes. With a mixing ratio of 1:1, the working time of 3M™ Scotch Weld™ DP810 low odour acrylic adhesive is 10 minutes, during which the position of the bonded components can be adjusted before the adhesive sets. The adhesive reaches handling strength in about 20 minutes and full curing in 8 to 24 hours (at 22 °C). (Note: excess adhesive exposed to ambient air around the bond line may retain its tack for up to 48 hours). 3M™ Scotch-Weld™ DP810 low-odour acrylic adhesive meets the requirements of the UL 746C standard regarding the use of polymeric materials in electrical equipment. Easy adhesion to acrylic. Acrylic adhesives (often referred to as epoxy adhesives) are two-part adhesives characterised by excellent strength and durability of the bonded joint, and in some cases, slightly lower adhesion than two-part epoxies. Acrylic adhesives, however, have several properties that allow for easy use, such as much faster curing, higher tolerance for oiled or unprepared bonded surfaces, and the possibility of bonding to a wide range of materials including almost all plastics. The formulation of newer acrylic adhesives is stable at room temperature with a moderate shelf life.
Additional parameters
| Category: | Scotch-Weld Two-Part Adhesives |
|---|---|
| EAN: | 04054596675353 |
| Handling strength: | 20 minutes |
| Peel strength at 24°C: | 53 N/cm |
| Shear strength at -55°C: | 8 MPa |
| Shear strength at 24°C: | 25 MPa |
| Shear strength at 82°C: | 3 MPa |
| mixing ratio: | 1:1 |
| Industries: | Metalworking, Advertisement, Wood processing, Special vehicle |
| Product colour: | Green |
| Container size (metric units): | 400 ml |
| Indoor/Outdoor: | Both |
| open time: | 10 minutes |
Discussion
Be the first who will post an article to this item!
