DP460 SCOTCH-WELD 3M high-strength epoxy adhesive, 50 ml
Code: 7100200496Product detailed description
3M Scotch-Weld DP460 - High Strength Epoxy Adhesive for Bonding Metals, Composites, Plastics and Ceramics, 50 ml
DP460 epoxy adhesive is a two-part epoxy adhesive cured at room temperature, supplied in a 3M Duo-Pak cartridge for use with the 3M EPX applicator.
- high shear bond strength.
- high peel strength.Simultaneous mixing and dispensing of both components in a 2:1 ratio allows for gap filling thanks to the appropriate mixture density.
- excellent resistance to environmental influences.
- easy mixing and controlled flow.
General characteristics
High shear bond strength. High peel strength. Medium viscosity
Features and benefits
Simultaneous mixing and dispensing of both components in a 2:1 ratio allows for gap filling thanks to the appropriate mixture density. Excellent resistance to environmental influences. Easy mixing and controlled flow.
An EPX applicator gun and mixing nozzle are required for application, see the related tab.
For small applications where you do not wish to purchase an applicator gun, you may simply order the adhesive and a plunger for dispensing the adhesive. After dispensing the adhesive using the plunger, manually mix both components in a clean container and apply using a brush, spatula or other tool.
Additional parameters
| Category: | Adhesives |
|---|---|
| EAN: | 467190210051 |
| Application: | Metal Bonding, Bonding of plastics except PP and PE, Glass bonding, Bonding of Composites |
| colour: | Beige |
| area of application: | Advertisement, Wood processing, Metalworking, Special Vehicles |
| chemical resistance: | Excellent |
| UV resistance: | Excellent |
| moisture resistance: | Excellent |
| Shape: | Elastomer-toughened epoxy |
| Handling strength: | 4-6 hours |
| Shear strength: | ABS 575 psi, Acrylic 330 psi, FRP 1000 psi, Etched Aluminium FPL - 4500 psi, Copper 4000 psi, Brass 4000 psi, Neoprene/Steel 120 psi, Stainless Steel 4000 psi, Cold Rolled Steel 2800 psi, Polycarbonate 500 psi, Galvanised Steel 2000 psi, PVC 350 psi, SBR/Steel 140 psi |
| Joint type: | Permanent |
| Full curing time: | 48 hours |
| Application method: | EPX Applicator Guns |
| Opening hours: | 60 minutes |
| Peel strength at 24°C: | 142 N/cm |
| Shear strength at -55°C: | 31 MPa |
| Shear strength at 24°C: | 31 MPa |
| Shear strength at 82°C: | 5 MPa |
| mixing ratio: | 2:1 |
| Aggregation: | Liquid |
Discussion
Be the first who will post an article to this item!
