DP460, 3M Scotch-Weld 2K toughened epoxy adhesive, off-white, 400 ml
Code: 7100200498Product detailed description
3M Scotch-Weld DP460 - 2K Toughened Epoxy Adhesive, Off-White, 400 ml
- A working time of up to 60 minutes provides sufficient time to adjust the material being bonded
- Adhesive toughness ensuring impact resistance and high fatigue resistance, allowing the joint to withstand demanding conditions
- Easy mixing and straightforward application
- High peel and shear strength enables the creation of strong joints under critical conditions
- The open time is 60 minutes and handling strength is available in approx. 4–6 hours
3M™ Scotch-Weld™ 460 epoxy adhesive is a toughened two-part adhesive with a 2:1 mix ratio, a working time of up to 60 minutes, and handling strength after approximately four hours. This adhesive enables the creation of a strong and durable joint on a wide range of surfaces.
3M™ Scotch Weld™ 460 epoxy adhesive exhibits excellent peel and shear strength and good impact resistance. It can be used to bond a wide range of surfaces, such as ceramics, wood and certain types of plastics. The preparation and application process of 3M™ Scotch Weld™ 460 epoxy adhesive is straightforward and simple. Simply mix both components at a 2:1 ratio by volume and then apply the adhesive according to the instructions to achieve a strong and durable joint. Both components are easy to mix, with a working time of up to 60 minutes providing users sufficient time to adjust the bonded surfaces before a long-term durable bonded joint is formed. Mixing and application can be facilitated by using 3M™ Scotch Weld™ EPX™ applicators with Duo Pak cartridges. Recommended use: Bonding, Joining, Wedging, Fastening, Assembly, Wrapping, Potting, Sealing. What are epoxy adhesives? 3M™ epoxy adhesives fall into the category of so-called structural adhesives, which also include polyurethane, acrylate, cyanoacrylate, etc. Epoxies are reactive polymers in a liquid state that begin to harden based on a chemical reaction after the components are mixed, creating a strong plastic material. After mixing these two components in the specified ratio, the curing process begins, during which the adhesive can be applied and the position of both bonded surfaces adjusted within a certain timeframe. This time ranges from several minutes up to 48 or more hours. Depending on their composition, these structural adhesives exhibit high peel and shear strength and better resistance to high temperatures and chemicals than other common adhesives. Epoxy adhesives generally have the highest overall strength, highest efficiency and resistance to high temperatures, solvents and climatic influences. Epoxy adhesives are most commonly used in construction and house building, in the production of aircraft, cars, bicycles, boats, golf clubs, skis and snowboards, but they also find application in other sectors, practically wherever high strength of the bonded joint is required.
Additional parameters
| Category: | Scotch-Weld Two-Part Adhesives |
|---|---|
| EAN: | 04054596679153 |
| Handling strength: | 1h |
| Peel strength at 24°C: | 142 N/cm |
| Shear strength at -55°C: | 31 MPa |
| Shear strength at 24°C: | 31 MPa |
| Shear strength at 82°C: | 5 MPa |
| mixing ratio: | 2:1 |
| Product colour: | Beige |
| Container size (metric units): | 400 ml |
| Application surfaces: | glass, Plastics other than PE and PP, Metals, ceramics |
| Maximum operating temperature (Celsius): | -30 to +149 |
| Curing time: | 24h |
Discussion
Be the first who will post an article to this item!
