DP420NS 3M Scotch-Weld 2K toughened epoxy adhesive, non-sag, black, 400 ml

Code: 7100010680
€132 / pcs €109,10 excl. VAT Measure price:
1-3 weeks
Delivery to:
9.12.2026
Delivery options

3M Scotch-Weld DP420NS - 2K Toughened Epoxy Adhesive, Non-Sag, Black, 400 ml

Detailed information

Product detailed description

3M Scotch-Weld DP420NS - 2K Toughened Epoxy Adhesive, Non-Sag, Black, 400 ml

  • High peel and shear strength ensuring a permanent bond at both high and low temperatures
  • Tough adhesive with resistance to impact and fatigue
  • Working time of up to 20 minutes provides sufficient time for adjusting the position of the bonded material
  • Non-slump formula ensures that the adhesive remains at the point of application
  • Bonding, joining, epoxy bonding, fastening, assembly, encapsulation, potting and sealing

3M™ Scotch-Weld™ DP420NS is a black, toughened, non-sag, two-component structural epoxy adhesive with good strength and high resistance to impact and fatigue, meeting the requirements for bonding in demanding conditions. 3M™ Scotch-Weld DP420NS epoxy adhesive can replace mechanical fasteners, screws, rivets and spot welds in a wide range of applications.

When using the adhesive in Duo-Pak packaging, use a 3M dispenser to achieve easy and precise metering, mixing and application. High peel and shear strength ensuring a permanent bond at both high and low temperatures 3M™ Scotch-Weld™ DP420NS epoxy adhesive allows the strength of the bonded joint to be maintained at high and low temperatures, enabling it to withstand temperatures up to 204 °C during paint baking for 60 minutes. It is suitable for a wide range of substrates, such as metal, ceramics, wood, glass, a variety of composites and plastics, and represents an excellent bonding agent used indoors for joining, bonding, potting, panel bonding and structural bonding. 3M™ Scotch-Weld™ DP420NS epoxy adhesive meets the requirements of the UL 94 HB standard. Recommended use: Assembly of smaller joints; Assembly in demanding operations; Metalworking; Bonding of carbon fibre materials; Working time up to 20 minutes provides sufficient time to adjust the position of the bonded material; 3M™ Scotch-Weld™ DP420NS epoxy adhesive reaches handling strength after approximately 2 hours and full curing after 24 hours (at a temperature of 22 °C). With a mixing ratio of 2:1, the working time is 20 minutes, allowing the position of bonded components to be adjusted before the adhesive sets. The adhesive is available in various packaging sizes and can be applied in different ways depending on the user's needs and the specific task. Toughened adhesive with resistance to impact and fatigue 3M™ Scotch-Weld™ DP420NS epoxy adhesive is suitable for applications in demanding environments. This flexible adhesive, whose formulation allows for strong adhesion and the creation of a long-term bond, represents another way in which 3M leverages its expertise to meet and exceed the requirements of the most demanding applications. What are epoxy adhesives Epoxy adhesives fall into the category of so-called structural adhesives, which also include polyurethane, acrylate, cyanoacrylate, etc. Epoxies are reactive polymers in a liquid state that begin to harden based on a chemical reaction after the components are mixed, creating a strong plastic material. After mixing these two components in the specified ratio, it begins

Additional parameters

Category: Scotch-Weld Two-Part Adhesives
EAN: 00021200392870
Shear strength: 4500 psi
Peel strength at 24°C: 107 N/cm
Shear strength at -55°C: 31 MPa
Shear strength at 24°C: 31 MPa
Shear strength at 82°C: 9 MPa
mixing ratio: 2:1
Adhesive type: Epoxy
Industries: Metalworking, Advertisement, Wood processing, Special vehicle, General Industry, shipping, construction, Electronics, Consumer Goods, Military and Government
Viscosity: Non-drip
Storage temperature: 16°C - 27°C
Product colour: Black
Self-extinguishing: UL94 HB
Physical form: Bulk Liquid
working time: 20 minutes
Container size (metric units): 400 ml
Indoor/Outdoor: Both
Product Form: Cartridge
Hardness: 75-80 Shore D
Total curing time: 24 hours
Design Challenges: Impact and Shock Absorption, NVH noise and vibration resistance

Discussion

Be the first who will post an article to this item!

Do not fill out this field

Security check

Vložením komentáře souhlasíte s podmínkami ochrany osobních údajů