DP410 SCOTCH-WELD 3M excellent structural white thixotropic adhesive with a short curing time
Code: 7100261739Product detailed description
3M Scotch-Weld DP410 - White Thixotropic Structural Adhesive, Fast Cure
DP410 epoxy adhesive is a low-flow two-part adhesive.
It is designed for use where toughness, high strength and fast curing are required.
Very fast curing at room temperature. Curing can be accelerated by applying mild heat.
Practical 2:1 mixing ratio by volume.
The mixed adhesive has low flow to facilitate application.
Ten-minute working time with very rapid strength build-up.
Cured epoxy system with good resistance to elevated temperatures.
High resistance to environmental influences.
| Packaging | 50 ml cartridge |
| Colour | Cream White |
An EPX applicator gun and mixing nozzle are required for application, see the related tab.
For small applications where you do not wish to purchase an applicator gun, you may simply order the adhesive and a plunger for dispensing the adhesive. After dispensing the adhesive using the plunger, manually mix both components in a clean container and apply using a brush, spatula or other tool.
Additional parameters
| Category: | Adhesives |
|---|---|
| EAN: | 54001895850382 |
| Application: | Metal Bonding, Bonding of plastics except PP and PE, Glass bonding |
| colour: | Cream white |
| area of application: | Advertisement, Wood processing, Metalworking, Special Vehicles |
| chemical resistance: | Excellent |
| UV resistance: | Excellent |
| moisture resistance: | Excellent |
| temperature resistance: | -30°C to 100°C |
| Shape: | Elastomer-toughened epoxy |
| Handling strength: | 30-40 minutes |
| Shear strength: | ABS 580 psi, Carbon Fibre Reinforced Epoxy 4786 psi, Fenoplast Fibreglass Reinforced 3191 psi, Brass (ground) 2321 psi, Stainless steel (brushed) 2756 psi, Ground Aluminium 2466 psi, Ground Plated Aluminium 3191 psi, Cold Rolled Steel (Ground) 2466 psi, Polyamide 290 psi, Fibreglass-reinforced polyester (ground) 1305 psi, Polystyrene (ground) 435 psi, PVC 435 psi |
| Joint type: | Permanent |
| Full curing time: | 48 hours |
| Application method: | EPX Applicator Guns |
| Opening hours: | 10 minutes |
| Peel strength at 24°C: | 96 N/cm |
| Shear strength at -55°C: | 28 MPa |
| Shear strength at 24°C: | 38 MPa |
| Shear strength at 82°C: | 8 MPa |
| mixing ratio: | 2:1 |
| Aggregation: | Liquid |
two-part adhesive sample - application, handling
Discussion
Be the first who will post an article to this item!
