DP410 3M Scotch-Weld 2K toughened epoxy adhesive, Part A, black, 20 l

Code: 7100055704
€4 948,20 / pcs €4 089,40 excl. VAT Measure price:
1 week
Delivery to:
30.11.2026
Delivery options

3M Scotch-Weld DP410 2K Toughened Epoxy Adhesive - Component A, Black, 20 l

Detailed information

Product detailed description

3M Scotch-Weld DP410 - 2K Toughened Epoxy Adhesive, Component A, Black, 20 L

  • Fast curing at room temperature; curing can be accelerated by a slight increase in temperature.
  • Convenient 2:1 mix ratio by volume.
  • The adhesive has lower fluidity after mixing the components, which allows for easy application
  • Easy to mix and dispense, fast curing, provides reliable bonds, has practical viscosity and other advantages
  • The open time is 10 minutes and handling strength is available in approximately 30 minutes

3M™ Scotch-Weld™, Epoxy Adhesive, 410, is a two-component structural adhesive. This adhesive is intended for cases where toughness, high strength and fast curing are required. It is a fast-drying and highly effective adhesive. It is characterised by toughness and excellent bond durability.

3M™ Scotch-Weld™, Epoxy Adhesive, DP410, offers very fast curing at room temperature (curing can be accelerated by a slight increase in temperature). Convenient 2:1 mix ratio by volume. The mixed components of the adhesive have lower fluidity, which allows for easy application. The working time of the adhesive is 10 minutes with very fast bond strengthening. It is a toughened epoxy system with good resistance to higher temperatures and high resistance to climatic influences.

Additional parameters

Category: Scotch-Weld Two-Part Adhesives
EAN: 04046719965724
Application: Bonding of panels to the frame and reinforcements to the panels, Sealing, Potting and Encapsulation of Electronics, Large Area Lamination Assembly, Joining with small joints, Mounting and Trim
area of application: Advertisement, Wood processing, Metalworking, Special Vehicles
chemical resistance: Excellent
UV resistance: Excellent
moisture resistance: Excellent
temperature resistance: -30°C to 100°C
Shape: Elastomer-toughened epoxy
Handling strength: 80 minutes
Shear strength: ABS 580 psi, Carbon Fibre Reinforced Epoxy 4786 psi, Fenoplast Fibreglass Reinforced 3191 psi, Brass (ground) 2321 psi, Stainless steel (brushed) 2756 psi, Ground Aluminium 2466 psi, Ground Plated Aluminium 3191 psi, Cold Rolled Steel (Ground) 2466 psi, Polyamide 290 psi, Fibreglass-reinforced polyester (ground) 1305 psi, Polystyrene (ground) 435 psi, PVC 435 psi
Joint type: Permanent
Full curing time: 48 hours
Opening hours: 10 minutes
Peel strength at 24°C: 96 N/cm
Shear strength at -55°C: 28 MPa
Shear strength at 24°C: 38 MPa
Shear strength at 82°C: 8 MPa
mixing ratio: 2:1
Aggregation: Liquid
Product colour: Black
Container size (metric units): 20l

Discussion

Be the first who will post an article to this item!

Do not fill out this field

Security check

Vložením komentáře souhlasíte s podmínkami ochrany osobních údajů