DP270 SCOTCH-WELD 3M epoxy adhesive for potting, sealing and encapsulation, clear, 48.5 ml content
Code: 7100200493Product detailed description
3M Scotch-Weld DP270 Epoxy Adhesive - Potting, Sealing And Encapsulating, Clear, 48.5 ml
3MTM Scotch-WeldTM DP270 epoxy potting compound/adhesive (or 3M™ Scotch-Weld Epoxy potting compound/adhesive 270 B/A) is a two-component low-viscosity epoxy resin system designed primarily for potting, sealing and encapsulating many electronic components and is available in clear or black colour. 3M™ Scotch-Weld epoxy potting compound/adhesive DP270 is non-corrosive to copper and offers good thermal shock resistance properties and excellent retention of electrical insulation properties under high humidity conditions.
3M™ Scotch-Weld™ DP270 epoxy potting compound/adhesive has a service life of approximately 70 minutes, the tack-free time is approximately 3 hours and it is fully cured after 48 hours at 73 °F (23 °C). This product creates no exothermic reaction in 5-10 grams weight and a very mild exotherm in larger weights.
3M™ Scotch-Weld™ DP270 epoxy potting compound/adhesive is ideal for potting and encapsulating many heat-sensitive or fragile components, such as glass diodes and sensors, as well as transformers, coils, chokes, relays etc. available in a practical 3M™ EPX applicator system for use at multiple stations and in bulk containers for high-volume applications.
Available in bulk containers as Scotch-Weld 270 B/A epoxy potting compound/adhesive.
• Good thermal shock resistance
• Excellent electrical properties
• Complies with UL 94 HB (File No. E61941)
• Non-corrosive to copper
• Long service life
• Negligible exotherm
• Excellent electrical properties
• Complies with UL 94 HB (File No. E61941)
• Non-corrosive to copper
• Long service life
• Negligible exotherm
An EPX applicator gun and mixing nozzle are required for application; see the related tab.
For small applications where you do not wish to purchase an applicator gun, you may simply order the adhesive and a plunger for dispensing the adhesive. After dispensing the adhesive using the plunger, manually mix both components in a clean container and apply using a brush, spatula or other tool.
Additional parameters
| Category: | Adhesives |
|---|---|
| EAN: | 4054596677371 |
| colour: | Clear |
| area of application: | Advertisement, Speciality Vehicle, Potting and Encapsulation of Electronics |
| chemical resistance: | Excellent |
| UV resistance: | Excellent |
| moisture resistance: | Excellent |
| temperature resistance: | -30°C to 80°C |
| Shape: | potting epoxy |
| Handling strength: | 3 hours |
| Joint type: | Permanent |
| Full curing time: | 48 hours |
| Application method: | EPX Applicator Guns |
| Opening hours: | 60-70 minutes |
| Peel strength at 24°C: | 4 N/cm |
| Shear strength at -55°C: | 8 MPa |
| Shear strength at 24°C: | 17 MPa |
| Shear strength at 82°C: | 2 MPa |
| mixing ratio: | 1:1 |
| Aggregation: | Liquid |
| Shore hardness: | 83 |
| Viscosity: | 7 000 - 16 000 cps |
| Self-extinguishing: | UL94 HB |
Discussion
Be the first who will post an article to this item!
