DisplayMount 3M, 400 ml, high-strength adhesive for paper, cardboard, card, fabric, carpet, rubber and most plastics

Code: 7100296529
€23,10 / pcs €19,10 excl. VAT Measure price:
in stock (10 pcs)
Delivery to:
20.11.2026
Delivery options

3M DisplayMount - 400ml, High Strength Adhesive For Paper, Cardboard, Cardstock, Fabric, Carpet, Rubber And Most Plastics

Detailed information

Product detailed description

3M DisplayMount - 400 ml, High-Strength Adhesive For Paper, Cardboard, Card, Fabric, Carpet, Rubber And Most Plastics

Versatile clear spray adhesive with high strength designed for permanent bonding and joining of most porous and non-porous materials such as paper, cardboard, card, fabric, carpet, rubber, most plastics etc.

The adhesive is specifically intended for exhibition, studio and theatre installations, work with exhibited goods and many other applications that require a highly effective adhesive.

On a large scale, it is used in industry, exhibition construction, design, advertising and wherever fast, strong and permanent joints are required.

3M Display mount spray adhesive allows for the immediate attachment of material and then creates a strong, secure and permanent bond.

The adhesive is sufficient for approx. 7 - 10 m2 of area depending on the absorbency of the material.

Solvent: Petroleum distillates, pentane, acetone
Flash point: -46 °C (propellant)
Propellant: Propane, hydrocarbon
Content: 400 ml (293 g)
Spray type: Particle
Colour: Clear

Align the arrow on the nozzle with the dot on the edge of the container. This ensures the correct position of the nozzle and maximum utilisation of the container contents. Shake the container well and spray briefly away from the bonding surfaces to clear the nozzle.

Apply the adhesive at a 90-degree angle, at a distance of 20 cm from the surfaces to be bonded. For good coverage, apply a thin even layer at a steady speed. Begin applying the adhesive from the edges of the bonding surface to ensure their proper adhesion.

Allow the adhesive on the bonding surface to tack for a few seconds, then join the surfaces and press down evenly, from the centre outwards.

To prevent the nozzles from clogging, whenever work is interrupted, turn the container upside down and hold the nozzle pressed until it stops.

Additional parameters

Category: Adhesives
EAN: 05900422002871
colour: Clear
Shape: Aerosol
Joint type: Permanent
Application method: Spray application
Aggregation: Liquid
Yield: 7-10 m2
Ignition point: -46 °C

Discussion

Be the first who will post an article to this item!

Do not fill out this field

Security check

Vložením komentáře souhlasíte s podmínkami ochrany osobních údajů