AD 5622 magnetic flexible adhesive tape, width 19 mm, Thickness 0.5 mm, price per 1 metre
Code: 3M.35.1145Product detailed description
AD 5622 Magnetic Flexible Adhesive Tape - 19 mm Width, 0.5 mm Thickness, Price Per 1 Metre
It can be easily bent, twisted, stretched and cut without any loss of magnetic energy. It adapts to the shape of the surface and does not crack. It does not lose its magnetic properties if damaged or dropped. It is permanently magnetic. The tape is adhesive on one side.
The adhesive adheres very well to various types of materials including wood, metal and plastics with high surface energy, such as polypropylene.
This tape is very resistant to weather influences, low temperatures and UV radiation. It is moderately durable against acids. The holding force of the magnet depends significantly on the spatial arrangement. The tensile strength is usually greater than the shear strength. It is greatest when the tape is on one side and a ferromagnetic plate (without gap, without paint) is on the other. Even greater force is achieved when using two tapes against each other in the same orientation.
Thickness: 0.5 mm
Width: 19 mm
Carrier: hard rubber
Temperature resistance: -40°C to +71°C
Weather resistance: very good
Resistance to oils and thinners: good
Use: For magnetic shielding of devices, e.g. the back of a monitor, for minor adjustments of magnetic fields, e.g. CRT adjustment, for holding advertising boards, exhibits, photographs or covers on walls and vehicles. If a board is to be attached to a non-magnetic surface (e.g. a plastic wall), magnets must also be adhered to this wall, precisely opposite the magnets on the board. For best results, it is advisable to use several small rectangles of tape, or to use the entire perimeter of the back wall of the board. For boards with heavy samples, the tape can also be applied diagonally.
Additional parameters
| Category: | Adhesive tapes |
|---|---|
| Application: | Minor adjustments of magnetic fields, e.g. CRT adjustment, Magnetic shielding for devices, e.g. the rear of a monitor, For securing advertising boards, exhibits, photographs or covers on walls and vehicles |
| Thickness: | 0.5 mm |
| colour: | Black |
| Carrier: | Polymer |
| area of application: | Electronics, Advertisement |
| chemical resistance: | Good |
| UV resistance: | Excellent |
| moisture resistance: | Excellent |
| temperature resistance: | -40°C to 71°C |
| Adhesive: | Acrylic |
Discussion
Be the first who will post an article to this item!
