967A Flap disc Cubitron II, 150 mm

Code: 7100026188
€6,90 / pcs €5,70 excl. VAT Measure price:

Choose variant

967A - 65057 Flap Disc Cubitron™ II 150 mm x 22 mm

Detailed information

Grit: P40+
in stock (146 pcs) | 7100026188
Delivery to: 20.11.2026
€6,90 / pcs
€5,70 excl. VAT
Grit: P60+
in stock (194 pcs) | 7100026189
Delivery to: 20.11.2026
€6,90 / pcs
€5,70 excl. VAT
Grit: P80+
in stock (194 pcs) | 7100025343
Delivery to: 20.11.2026
€6,90 / pcs
€5,70 excl. VAT

Product detailed description

Cubitron™ II 967A - 65057 Flap Disc - 150 mm x 22 mm, P 40

  • 3M precision-shaped grain maintains super-sharp edges that cut extremely fast with low pressure
  • Designed to cool better and reduce discoloration/oxidation of the machined metal
  • Flap discs sand and blend the surface in one step
  • Durable Y-weight polyester-cotton blend cloth ensures regulated and uniform wear for maximum disc utilisation in low to medium pressure applications.
  • The Grinding aid cooling layer applied to the disc minimises temperature during sanding of heat-sensitive alloys, such as stainless steel, titanium and nickel alloys.
The 3M™ Cubitron™ II 967A flap disc is ideal for low and medium pressure applications on flat surfaces and edges, especially for surface preparation before colour and when processing stainless steel.
Cubitron ™ II Flap Disc 967A benefits from our own precision-shaped grain technology. These grains sand exceptionally well and the flexibility of the flap construction allows sanding and blending in a single step. Since our precision-shaped grains sand excellently with less pressure, operators can complete demanding tasks, such as weld sanding, deburring, rust removal, edge sanding and surface blending, faster and with less fatigue. They contain a Grinding-Aid bonding layer that reduces heating. This helps keep the disc cooler on stainless steel and heat-sensitive metals, such as nickel and titanium alloys, which reduces metal discoloration and the formation of heat maps. The high performance and durability of 3M™ precision-shaped grain is enhanced by a unique Y-weight polyester-cotton blend cloth, which allows controlled, uniform wear without premature matting or polishing, so operators complete more work with each disc. Flap discs are attached to an angle grinder. Use type 27 on flat surfaces or away from edges. 3M™ Cubitron™ II products have raised the bar for high-performance abrasives. Precision-shaped grain outperforms conventional ceramic industrial abrasives in grinding performance and service life, and lower pressure is sufficient to achieve high performance. As a result, operators can sand faster and with less pressure, thus minimising operator fatigue. Flap discs sand and finish in one step. This makes them a time- and cost-saving solution for many applications, especially where a scratch-free final finish is important. Use them for weld sanding, deburring, rust removal, bevel sanding and surface blending. When developing the precision-shaped grain, our designers started with 3M™ ceramic abrasive grain. Using patented technology, they created triangular-shaped grains and oriented them electrostatically on the backing to create sharp peaks that maximise abrasive potential. These peaks slice into the metal like a knife through butter, instead of just rubbing or plowing like traditional abrasives, and constantly self-sharpen as the tips break off. This enables super-fast material removal and reduces friction-induced heating, heat tinting and metal discoloration.

Additional parameters

Category: Sanding, polishing and cutting
Maximum rotational speed: 12 250 rpm
Grit: P60+, P80+, P40+
Diameter: 150 mm
Conical: Yes

Video

Discussion

Be the first who will post an article to this item!

Do not fill out this field

Security check

Vložením komentáře souhlasíte s podmínkami ochrany osobních údajů