94 Primer 3M for increasing surface energy, ampoule

Code: 7100306437
€2,30 / pcs €1,90 excl. VAT Measure price:
in stock (822 pcs)
Delivery to:
20.11.2026
Delivery options

3M 94 Primer - Surface Energy Increase, 0.66 ml Ampoule

Detailed information

Product detailed description

3M 94 Primer - Surface Energy Increase, Ampoule 0.66 ml

Special coating for increasing the tack of low surface energy (LSE) materials, such as polypropylene, polyethylene or powder colours.

It is most commonly used for full-surface film wrapping on difficult-to-bond plastic parts. It is also used on materials with komaxit colour and other low-energy coatings.

Container contents: 0.66 ml

Application procedure:

Surface preparation: The bonded surface must be relatively clean and dry. Contaminated surfaces
must be cleaned with a mixture of isopropyl alcohol and water in a 50:50 ratio.

Application: Shake the 94 primer coat thoroughly before use. Apply a
minimal amount to the bonded surface to create a thin layer covering the entire surface. Before applying the tape,
allow the 94 primer coat to dry thoroughly. This usually takes five minutes at room
temperature. Before applying the tape, ensure that the coated surface has remained clean. Porous surfaces
require the application of two layers of 94 primer coat to ensure uniform coverage and
good adhesion. Allow the first layer to dry before applying the second layer. The primer coat
94 can be applied with a brush or cloth. It can also be applied with a pressure spray gun,
a foam roller or similar application equipment.

Cleaning: Primer coat 94 can be removed with isopropyl alcohol. Thorough
scrubbing may be required.

Note: When handling cleaning agents, carefully read and follow
the safety precautions and instructions for use from the manufacturer.

Additional parameters

Category: Industrial cleaners, primers and lubricants
EAN: 00021200242168

Application video

Discussion

Be the first who will post an article to this item!

Do not fill out this field

Security check

Vložením komentáře souhlasíte s podmínkami ochrany osobních údajů