8926-02 Double-sided thermally conductive tape 3M, 1.5 W/m-K, thickness 0.2 mm, for heat transfer between the heat sink and electronic components such as VRM power supply, memory

Code: 3M.35.0951
from €10,30 / pcs from €8,50 excl. VAT Measure price:

Choose variant

3M 8926-02 Thermally Conductive Double-Sided Adhesive Tape - 1.5 W/m-K, Thickness 0.2 mm, For Heat Transfer Between Heatsink And Electronic Components Such As VRM Power Supply, Memory

Detailed information

width: 50mm, roll length: 40m
3 weeks | 3M.35.0949
Delivery to: 9.12.2026
€179,40 / pcs
€148,30 excl. VAT
width: 12mm, roll length: 40m
3 weeks | 3M.35.0946
Delivery to: 9.12.2026
€46 / pcs
€38 excl. VAT
width: 19mm, roll length: 40m
3 weeks | 3M.35.0947
Delivery to: 9.12.2026
€70,60 / pcs
€58,40 excl. VAT
width: 25mm, roll length: 40m
3 weeks | 3M.35.0948
Delivery to: 9.12.2026
€91,60 / pcs
€75,70 excl. VAT
width: 100mm, roll length: 40m
3 weeks | 3M.35.0950
Delivery to: 9.12.2026
€354,80 / pcs
€293,20 excl. VAT
width: 21x30cm, roll length: A4, Thickness: 0.2mm
in stock (9 pcs) | 3M.35.0951
Delivery to: 20.11.2026
€10,30 / pcs
€8,50 excl. VAT

Product detailed description

3M 8926-02 Thermally Conductive Double-Sided Adhesive Tape - 1.5 W/m-K, 0.2 mm Thickness, For Heat Transfer Between Heat Sink And Electronic Components Such As VRM Power Supply, Memory

3M™ Thermally Conductive Tape 8926 is self-adhesive. This tape is designed with good transfer capability, easy application and the possibility of repositioning thanks to the thin PET carrier. 3M 8926 Series tape is made of a soft acrylic polymer and comes in several different thicknesses, allowing for excellent wetting or adaptability to many surfaces.

3M™ 8926 Series Thermally Conductive Tapes (TCIP) have thicknesses of 0.2, 0.25 and 0.5mm and contain thermally conductive ceramic particles. These tapes are designed for good custom cutting (converting); they are easy to handle and can be adjusted if necessary thanks to the thin PET carrier (liner).

  • Good thermal conductivity (> 1.5 W / m-K)
  • Excellent dielectric performance
  • Low thermal impedance
  • Good and reliable adhesion performance to Al and SS
  • Vibration damping
  • Can be used for thermal management
  • Can be used for general heat dissipation
  • Can be used for bonding / joining parts

General heat sink bonding
• IC chip packaging heat conduction
• Printed circuit board
• LED module/board bonding
• Flat panel display assembly (e.g. LCD and PDP devices)
• COF chip heat conduction
• Mechanical fastening such as clamp, bracket or screw can be used in parallel with this tape

Discussion

Be the first who will post an article to this item!

Do not fill out this field

Security check

Vložením komentáře souhlasíte s podmínkami ochrany osobních údajů