7007AB blue protective film 3M for metal surfaces, roll length 350m, thickness 0.070 mm
Code: 3M.42.0014Product detailed description
7007AB blue protective film 3M for metal surfaces, roll length 350m, thickness 0.070 mm
Usage
- metallic surface, shiny or slightly rough
- aluminium, polished
- aluminium, brushed
- aluminium, anodised
- alloy steel, brushed
- lacquered surface (acrylic or synthetic resin)
- powder-coated surfaces
- plastic boards
Technical information
3MSurface protective films and tapes protect products from dirt, dust and damage during assembly, maintenance, warehousing and transportation. The adhesive used has low adhesion, so the protective film or tape can not only be easily applied, but also removed without residue.3M offers a wide product range of these films and tapes for a variety of applications.
Preparation
To achieve optimum adhesion, the substrate must be clean and free from dust, oil, grease, solvents, etc.
Usage
Apply and remove at temperatures between 10°C and 40°C.
Warehousing
Protective films and tapes should be stored at temperatures between 10°C and 40°C, and a relative humidity of 50%.
Application
Protects against scratching
Protects against the effects of dust, damage and abrasion
Protects surfaces during repairs, assembly, processing and shipping
Reduces factors contributing to surface ageing
Protects against colour fading caused by UV radiation
Extends the service life of the product
Protects the product during warehousing
Additional parameters
| Category: | Adhesive tapes |
|---|---|
| Application: | Protects surfaces during repairs, assembly, processing and shipping, Protects against colour fading caused by UV radiation, Protects against scratching, Protects against the effects of dust, damage and abrasion, Protects the product during warehousing, Reduces factors contributing to surface ageing, Extends the service life of the product |
| Thickness: | 0.070 mm |
| colour: | Blue |
| Carrier: | Polyethylene |
| Usage: | Lacquered surface (acrylic or synthetic resin), Aluminium, anodised, Aluminium, brushed, Aluminium, polished, Metal surface, glossy or slightly rough, Alloy steel, brushed, Powder-coated surfaces, Plastic Sheets |
| Adhesion to steel (N/cm): | 0,7 |
Discussion
Be the first who will post an article to this item!
