51815 Cutting compound 3M Fast Cut Plus Extreme, green, 1 kg, for polishing the surface sanded with Trizact abrasive

Code: 7100138236
€55,30 / pcs €45,70 excl. VAT Measure price:
in stock (18 pcs)
Delivery to:
20.11.2026
Delivery options

3M 51815 Fast Cut Plus Extreme Cutting Compound - Green, 1 kg, For Polishing Surfaces Ground With Trizact Abrasive

Detailed information

Product detailed description

3M 51815 Fast Cut Plus Extreme Cutting Compound - Green, 1 kg, For Polishing Trizact Abrasive Surfaces

3M Fast Cut Plus Cutting Compound provides two benefits at once: increased cutting ability and improved gloss. These properties significantly shorten the polishing process. The compound can be used with or without water, ideally on a 3M Perfect-it III 50487 green polishing wheel on a 3M electric or air sander (1500-2500 rpm). 3M Fast Cut Plus Compound allows for rapid scratch removal from all painted surfaces, including new and older HS paints and durable clear coats.


For optimal results, it is recommended to subsequently use 3M Perfect-it III Extra Fine 80349 compound applied to a 3M 50488 yellow wool polishing wheel.
Quantity: 1 L

Fast Cut Plus Compound is an aggressive abrasive liquid compound for use on refinish paints to remove abrasive scratches during the paint rectification process. It can also be used to remove oxidation, scratches, car wash scratches, etc, on original manufacturer’s paints.
Product highlights:
• Fast cutting
• Very easy clean up even on fresh paints
• Good Finish
• Can be “seen through” to check for any remaining sanding scratches before
moving on to next step
• Easy to use
• Low sling
• Can be use with or without water
• 1 kg bottle for easy dispensing

3M™ 50417 Fast Cut Plus Compound is an easy to use aggressive abrasive liquid compound for use on refinish paints to remove scratches from P1200 to P3000
grades abrasives after sanding out defects during the paint rectification process. It can also be used to remove oxidation and scratches, car wash scratches, etc, on
original manufacturer’s paints. 3M™ 50417 is recommended to be used with an electric or air driven Polishing
machine (1500-2000 rpm) equipped with a 3M™ Perfect-it™ Compounding Sponge Pad 09550 Perfect-it™ Back-up Pad 09552/3. Can also be used on any industry
typical foam or wool compounding pad.

Container: 1 litre bottle
Qty per box: 12 bottles
Flash point: >=62ºC closed cup
Colour: White
Consistency: Thick liquid with paraffinic
odour
Viscosity: 40 000-50 000 cps
pH: 7-9
% volatile: 28% by weight
Mineral Aluminium oxide

Renovace laku

Additional parameters

Category: Sanding, polishing and cutting
EAN: 4054596420397

Discussion

Be the first who will post an article to this item!

Do not fill out this field

Security check

Vložením komentáře souhlasíte s podmínkami ochrany osobních údajů