5019A clear protective film 3M for metals, wood, PVC, glass and ceramics, roll length 350m, thickness 0.052 mm

Code: 3M.35.0366
€103,50 / pcs €85,50 excl. VAT Measure price:

Choose variant

CANCELLED WITHOUT REPLACEMENT

Detailed information

width: 100mm
in stock (1 pcs) | 3M.35.0366
Delivery to: 20.11.2026
€103,50 / pcs
€85,50 excl. VAT

Product detailed description

5019A clear 3M protective film for metals, wood, PVC, glass and ceramics, roll length 350m, thickness 0.052 mm

Usage

- aluminium, anodised

- steel

- zinc

- copper

- lacquered surface (acrylic or synthetic resin)

- lacquered wooden surfaces

- rigid PVC, including window and door frames

- architectural glass (not exposed to ultraviolet radiation)

- plastered surface

- stone substitute surfaces

- ceramic surfaces of tiles and cladding

- synthetic fibre carpets (short pile)

Technical information

Roll length: 350 m
Thickness: 0.052 mm
Colour: clear
Adhesive: acrylic
Adhesion to steel (N/cm): 1.9 N/cm
Carrier: polyethylene
Maximum shelf life: 18 months
General Information

3MSurface protective films and tapes protect products from dirt, dust and damage during assembly, maintenance, warehousing and transportation. The adhesive used has low adhesion, so the protective film or tape can not only be easily applied, but also removed without residue.3M offers a wide product range of these films and tapes for a variety of applications.


Preparation
To achieve optimal adhesion, the substrate must be clean and free of dust, oil, grease, solvents, etc.


Usage
Apply and remove at temperatures between 10°C and 40°C.


Warehousing
Protective films and tapes should be stored at temperatures from 10°C to 40°C and relative humidity of 50%.

Application
Protects against scratching
Protects against dust, damage and abrasion
Protects surfaces during repairs, assembly, processing and shipping
Reduces factors contributing to surface ageing
Protects against colour fading caused by UV radiation
Extends the service life of the product
Protects the product during warehousing

Additional parameters

Category: Adhesive tapes
Application: Protects surfaces during repairs, assembly, processing and shipping, Protects against colour fading caused by UV radiation, Protects against scratching, Protects against the effects of dust, damage and abrasion, Protects the product during warehousing, Reduces factors contributing to surface ageing, Extends the service life of the product
Thickness: 0.052 mm
colour: transparent
Carrier: Polyethylene
Usage: Anodised aluminium, Ceramic Tile and Slab Surfaces, Synthetic Fibre Carpets (Short Pile), Lacquered wood surfaces, Lacquered surface (acrylic or synthetic resin), Copper, Steel, Plastered surface, Stone substitute surfaces, Construction glass (not exposed to ultraviolet radiation), Rigid PVC, including window and door frames, Zinc
Adhesion to steel (N/cm): 1,9

Discussion

Be the first who will post an article to this item!

Do not fill out this field

Security check

Vložením komentáře souhlasíte s podmínkami ochrany osobních údajů