4799 SCOTCH-WELD 3M 150 ml tube, adhesive for strong and flexible joints, EPDM rubber, microporous rubber, rubber, felt, canvas, linoleum
Code: 7000000926Product detailed description
3M Scotch-Weld 4799 - 150 ml Tube, Strong and Flexible Adhesive for EPDM Rubber, Microporous Rubber, Rubbers, Felts, Tarpaulins, Linoleums
3M™ industrial adhesive, 4799, provides a reliable bond for use with EPDM and rubber. This industrial adhesive, durable against heat and water, provides the durability you need and can rely on well into the future.
Ideal for EPDM and rubber, 3M™ industrial adhesive 4799 delivers a rigid bond solution that provides resistance to both heat and water. The formulation of our industrial adhesive 4799 allows it to be applied with a brush and to create a strong, flexible bond that stands the test of time. Recommended use: Weatherproofing, roof cloths, bonding rubber sheets, use in repair and maintenance. Adhesive application: Whether by spraying, brushing, or rolling, the application of 3M™ adhesive is a straightforward process. Begin by applying the adhesive to the surface to create a uniform layer. With an overlapping pattern, a single coat should suffice for most surfaces. Some materials, such as porous ones, may require an additional coat. To apply an additional coat, simply wait for the existing adhesive to dry, which can be determined by touch. You may then proceed with applying the additional coat.
- Heat and water durable adhesive offering long-term durability
- Bonds strongly and has reliable adhesion
- Ideal for weather-sealing, bonding/sealing rubber sheets
Instructions for use
1. Surface preparation: Bonded surfaces must be clean, dry, and free of grease and dust. To remove oil and contaminants, cleaning with
solvents, methyl ethyl ketone (MEK)*.
2. Application temperature: For best results, the adhesive and bonded surfaces must be at a temperature of at least 18 °C.
3. Application: Mix or shake well before use. Porous surfaces: Apply a uniform, thick layer of adhesive with a brush
to at least one less porous bonded surface. Join both materials immediately and ensure sufficient pressure to guarantee good contact.
Non-porous surfaces: Apply a uniform layer of adhesive to both surfaces. Allow the adhesive to dry (tack off) until it is tacky,
but does not transfer. Join both materials with firm pressure to ensure good contact.
4. Cleaning: Excess adhesive can be removed with a solvent, e.g. methyl ethyl ketone (MEK)
Additional parameters
| Category: | Adhesives |
|---|---|
| EAN: | 21200213540 |
| colour: | Black |
| chemical resistance: | Good |
| UV resistance: | Excellent |
| moisture resistance: | Excellent |
| temperature resistance: | -30°C to 80°C |
| Shape: | SBR |
| Joint type: | Permanent |
| Application method: | by squeezing from the tube, by spreading |
| Flammable fuel: | Yes |
| Flammable solvents: | Yes |
| Aggregation: | Liquid |
| Yield: | 7 m2 per litre |
| Appearance/Odour: | Black / Solvent Smell |
| Base material: | SBR |
| Ignition point: | -26 °C |
Discussion
Be the first who will post an article to this item!
