4693 high-performance adhesive for bonding plastics including difficult-to-bond, 0.9463 litres
Code: 7000046574Product detailed description
3M 4693 - High Performance Plastic Bonding Adhesive, 0.9463 Litres
The colourless, strong contact adhesive 3M Scotch-Weld 4693 is primarily designed for the bonding of plastics, including difficult-to-bond materials such as polyolefins and TPE. The adhesive is heat-reactivatable and has a long open time. The bond is highly durable against moisture and water.
It exhibits excellent bond strength to metals and many plastics, including polypropylene, polyethylene and high-impact / toughened polystyrene. Good resistance to water and ageing.
-
Excellent plastic adhesive
-
Long working time
-
Durable against water and heat
Surface preparation
Surfaces must be dry and free from dust, dirt, grease, oil, mould release agents or other contaminants. To achieve the best results,
the adhesive should be at a temperature of at least 18°C.
the adhesive should be at a temperature of at least 18°C.
Application
Porous surface: Apply, spray or pour a uniform layer of adhesive onto both surfaces. Highly absorbent materials may require multiple coats. Join the surfaces while the adhesive is tacky. Bond the surfaces with strong pressure.
Porous surface: Apply, spray or pour a uniform layer of adhesive onto both surfaces. Highly absorbent materials may require multiple coats. Join the surfaces while the adhesive is tacky. Bond the surfaces with strong pressure.
Non-porous surface: Apply, spray or pour a uniform layer of adhesive onto both surfaces. To create a bond with satisfactory strength, the adhesive must be dried at a temperature of 82°C. Bond the surfaces with strong pressure while they are warm.
Drying time: Drying time depends on temperature, humidity, airflow and the porosity of the bonded materials. When spreading, wait at least 10 minutes. Bonds can be created for up to 60 minutes. When spraying, bonds can be created almost immediately and for up to 60 minutes.
Heat reactivation: The adhesive can be reactivated by heat by increasing the temperature of the bonded joint to 82°C.
Cleaning: Excess adhesive can be removed with solvents.
Additional parameters
| Category: | Adhesives |
|---|---|
| EAN: | 21200837593 |
| Application: | Bonding of plastics including PP and PE |
| chemical resistance: | Very good |
| UV resistance: | Very good |
| moisture resistance: | Excellent |
| temperature resistance: | -21°C to 70°C |
| Shape: | Synthetic elastomer |
| Joint type: | Permanent |
| Application method: | Spraying, rolling, brushing |
| Flammable fuel: | Yes |
| Flammable solvents: | Yes |
| Aggregation: | Thin syrup |
| Ignition point: | -17 °C |
| System: | Solvent-based |
Video
Discussion
Be the first who will post an article to this item!
