3762/2 3M hot melt adhesive for corrugated cardboard, chipboard and wood, 10 kg (22 pounds)
Code: 3M.16.0104Product detailed description
- Aggressive hot adhesive quickly reaches handling strength in packaging or similar applications
- Medium working time allows for careful positioning and alignment
- Securely bonds difficult-to-bond substrates, such as lightly waxed surfaces
- Distributes the load over the entire length of the joint
- High dynamic load absorption reduces vibration and shock stress
Maintaining smooth production The formulation of 3M™ hot melt adhesive 3762 was developed to adhere and seal quickly, meeting the needs of high-volume production in packaging, wood processing, and assembly. This property increases the speed of box sealing and ensures adhesion to wood, cardboard, corrugated cardboard, and other fibrous substrates. It features high shear strength and low peel strength, meaning your packages remain closed and components remain bonded under most conditions. An economical and safe 30-second working time combined with a 1/8" bead is sufficient for positioning and alignment and supports a high pace in packaging, wood processing, and applications involving fibrous materials. We manufacture this product from a thermoplastic resin with 100% solids, and it is designed for use with our 3M™ hot melt adhesive applicators. As a low volatile organic compound (VOC) compound, this adhesive has minimal odour when heated, contributing to a better working environment. Recommended applications General packaging Recycling Packaging chipboard Point of sale Displays Headers Wood processing Exhibition displays Foam inserts Crafts Bonding waxed surfaces Advantages of hot melt adhesives Hot melt adhesive applicators, commonly called "glue guns", are tools used to apply liquefied thermoplastic adhesives and are available in low and high temperature versions. Low temperature applicators operate at approximately 121 ºC and are suitable for bonding heat-sensitive materials such as electronics, plastics, and fabrics. High-temperature applicators operate at a minimum temperature of approximately 193 ºC. The applicator creates a stream of adhesive when a solidified adhesive stick is inserted into the heating chamber, where it is melted by a constant temperature heating element. The molten adhesive is then extruded through the nozzle either by pneumatic pressure, a mechanical trigger, or pressure applied directly to the stick. The nozzle can be replaced to dispense adhesive in a manner that meets various requirements, from a thin, wide bead for sealing boxes to a narrow, thicker bead for bonding wood, composites, or metal. Nozzles are typically metal and become extremely hot during application, and can easily burn the skin. After being extruded from the applicator, the adhesive usually hardens quickly, in most cases within a few seconds. Hot melt adhesive applicators are widely used in industry, crafts, households, and when working with a wide range of materials, from paper and lace to wood and some metals.
Additional parameters
| Category: | Adhesives |
|---|---|
| Application: | Bonding of paper and corrugated cardboard |
| colour: | Light amber |
| area of application: | Automotive, Packaging, shipping, Electronics, Furniture, Advertisement, Consumer Goods, construction, General Industry, Wood processing |
| chemical resistance: | Very good |
| UV resistance: | Very good |
| moisture resistance: | Good |
| temperature resistance: | + 55°C |
| Shape: | EVA |
| Handling strength: | 35 s |
| Shear strength: | 545 psi |
| Melting temperature: | 220°C |
| Joint type: | Permanent |
| Full curing time: | 24 hours |
Discussion
Be the first who will post an article to this item!
