34103E 3M polisher Perfect-It 150mm, throw 21mm, 230V, 50Hz, Plug F
Code: 7100263992Product detailed description
| Type: | Electric |
| Type: | Orbital |
| Diameter: | 150 mm |
| Weight: | 2.6 kg |
| Cable length: | 9 m |
| Power: | 500W |
| Rotation speed (rpm): | 3000 + 5200 |
High-gloss surface finishing
No swirl scratches
No holograms
No burn-through
Rotary and oscillatory motions
Strong Hold
Variable speed control
Progressive speed release
Various grip positions for a user-friendly design
Orbit diameter: 21 mm
Voltage: 230V
Plug type: F
Frequency: 50Hz
For maximum backing pad diameter: 180 mm
Introducing the 3M™ Perfect-It™ orbital polishing system – a professional set of tools, polishing pastes, foam rubber and wool pads – typically used in detailing workshops, redesigned for professional use in automotive repair. An unconventional but welcome change in the process, allowing you to achieve a showcar shine without holograms or other defects. We have transformed one of the most dreaded steps in automotive repair into a step that anyone can master on the first attempt.
Try a system designed to work together – an easy-to-use polisher with specially formulated pastes and polishing foam rubber for the given type of polishing. Your technicians no longer have to fear holograms, burn-through, or other common pitfalls of traditional rotary polishing systems.
FREQUENTLY ASKED QUESTIONS
With an orbital system, you can achieve a consistent surface without holograms and you don't have to worry about the colour burning through. You will achieve a high-quality surface finishing with a
system that is easy to use and designed for all skill levels.
Where should I use the 3M™ Perfect-It™ Orbital System?
All vehicles or anywhere where paint repair is required; e.g. cars, trucks, motorcycles, tractors, boats, golf carts etc. It is great for repairs in bodyshops as well as for professional detailing.
Do I always have to use Trizact™?
It is recommended to always use Trizact™ for the fastest and most consistent polishing, even on fully cured paint. It also depends on the size of the defects and what you expect from the
result? If you have large defects, then our full process is recommended. If you are trying to remove very fine scratches, holograms or simply
trying to give your paint a gloss, then the orbital system is designed specifically for you.
Yes, the 3M™ Perfect-It™ orbital polishing system is suitable for freshly painted vehicles, as it leaves no defects on the clear coat. And it works great for old
paint.
The use of any other pastes is not recommended. Our new 3M™ Perfect-It™ paste system is designed specifically for use with our 3M™ Perfect-It™ Random Orbital polisher.
All our technical tests using other pastes showed lower performance levels.
Can I use 3M™ Perfect-It™ Random Orbital paste and polish with my rotary polisher?
We do not recommend using 3M™ Perfect-It™ Random Orbital coarse and fine polishing paste with a rotary polisher, as these pastes were designed specifically for use
with our 3M™ Perfect-It™ Random Orbital polisher. For rotary polishing, we recommend using our traditional colour-coded 3M™ Perfect-It™ system.
The 15mm orbital polisher is recommended for smaller and technically demanding areas.
The 21mm orbital polisher is preferred for larger, flat surfaces or for polishing the entire
vehicle.
We recommend using 130mm pads with the 15mm 3M™ Perfect-It™ Random Orbital polisher and 150mm pads with the 21mm 3M™ Perfect-It™ Random Orbital polisher.
Pads are available in coarse wool, medium wool, coarse and fine foam rubber.
For optimal performance, we recommend using speeds 4–6 for coarse polishing and 2–4 for polishing.
When using this tool, you do not need to apply any downward pressure. This could cause the pad to stall and stop rotating, which could have an adverse effect
on the final result.
Yes, you should let the pads move freely back and forth and rotate.
This may occur under certain circumstances, such as working with the pad on an edge, if you are working in a tight/hard-to-reach area, or if you apply excessive
pressure. To rectify this, release all pressure and increase the machine speed using the speed controller.
Additional parameters
| Category: | Sanding, polishing and cutting |
|---|---|
| EAN: | 4064035007614 |
Video
Discussion
Be the first who will post an article to this item!
