30662, 3M Trizact Hookit Foam abrasive disc 443SA, P5000+, 150 mm
Code: 7100003887Product detailed description
3M Trizact™ Hookit™ Foam Abrasive Disc - 30662, 5000 Grit, 443SA, 150 mm, 5000
- Designed to refine scratches from 3000 grit abrasive, reducing the overall finishing time.
- Always used wet, they provide a long service life and less loading than dry sanding.
- Allows technicians to refine scratches on paint using a lightweight random orbital sander instead of a heavier polisher.
- These 5000 grit foam discs are used as a further step after sanding with a 3000 grit 3M™ Trizact™ disc to further reduce the time required for polishing.
- Compared to traditional polishing, using 3M™ Trizact™ abrasive to remove sanding scratches can reduce the likelihood of heavy swirl marks, burn-through, and other defects caused by more aggressive processes.
By using 5000 grit 3M™ Trizact™ Hookit™ foam abrasives, you will spend less time compounding and reduce the risk of defects. Use these discs as a subsequent step to refine scratches after 3000 grit sanding to limit polishing. 3M™ Trizact™ abrasives are designed for a consistent cut and long service life.
Technicians can spend less time handling a heavy polisher while achieving a fine and consistent surface finishing by using 5000 grit 3M™ Trizact™ Hookit™ foam abrasive discs for final paint finishing. Use 3M™ Trizact™ 5000 foam discs to refine sanding scratches after 3000 grit sanding on painted surfaces and clear coats. When used wet, they provide the advantages of wet sanding against loading without the hydroplaning that reduces productivity and can occur when sanding on a too-wet surface. The foam backing ensures sufficient control and constant contact with the surface. Can be used with a soft interface pad to increase conformability on curved surfaces. The patented three-dimensional abrasive structure wears away to reveal fresh, sharp mineral – the abrasive constantly renews itself, providing a fast cut and long service life. When used with other 3M™ Trizact™ abrasives and as part of the 3M™ Perfect-It™ paint finishing system, it can reduce the overall finishing time.
Additional parameters
| Category: | 3M Products |
|---|---|
| EAN: | 50051131306627 |
| Grit: | P5000+ |
| Diameter: | 150 mm |
Discussion
Be the first who will post an article to this item!
