2214 HT NF Epoxy 1K adhesive for bonding metals and a wide range of high-temperature plastics, grey, 1 litre
Code: 7000079791Product detailed description
3M™ Scotch-Weld™ 2214 epoxy adhesives with high or regular density offer high strength, resistance to higher temperatures, and a smooth adhesive layer. These high-performance one-part adhesives with 100% solids and curing at 121 ºC are designed for the bonding of metals and a wide range of high-temperature plastics, such as carbon fibre epoxy composites, polyester, and phenolic resins.
Thanks to its paste-like consistency, it reaches the intended areas without sagging; 3M™ Scotch-Weld™ 2214 epoxy adhesive with regular density is a versatile aluminium-filled adhesive used when you need to create very strong joints in the temperature range of -53 °C to 121 °C. 3M™ Scotch-Weld™ 2214 epoxy adhesive with high density is a degassed version used when a very dense and maximally continuous adhesive layer is required. Both of these epoxy adhesives can be applied by spatula, trowel, or spray according to the specific project requirements. Recommended Use: Bonding of metals, especially when high-temperature strength is required. What are epoxy adhesives? Epoxy adhesives are part of the so-called structural adhesive category, which includes polyurethane, acrylate, cyanoacrylate, and others. Epoxies are reactive polymers in a liquid state that begin to harden based on a chemical reaction after the components are mixed, creating a strong plastic material. After mixing these two components in the specified ratio, the curing process begins, during which the adhesive can be applied and the position of both bonded surfaces adjusted within a certain timeframe. This timeframe ranges from several minutes to several hours. Depending on their composition, these structural adhesives exhibit high peel and shear strength and better resistance to high temperatures and chemicals than other common adhesives. Epoxy adhesives generally have the highest overall strength, high efficiency, and the best resistance to high temperatures, solvents, and weather conditions. Epoxy adhesives are most commonly used in construction and house building, in the production of aircraft, cars, bicycles, boats, golf clubs, skis, and snowboards, though they also find application in households and other uses. They are used practically wherever very strong bonded joints and resistance to weather conditions are required. These adhesives are popular due to their ease of use, mechanical strength, and chemical resistance. By changing the composition, epoxies can be created that are plastically flexible or extremely rigid, transparent or opaque, fast-curing or slow-curing. Thanks to the versatility with which these adhesives can be created, almost all requirements for the bonding of wood, metal, glass, stone, and various plastics can be met.
- High degree of degassing, which allows for the creation of a very dense and maximally continuous adhesive layer
- One-part adhesive with curing at higher temperatures, 100% solids content
- Thanks to its paste-like consistency, it reaches the intended areas without sagging
- Higher resistance to high temperatures than two-part epoxy adhesives
- Flammability test according to UL94 HB
Additional parameters
| Category: | Adhesives |
|---|---|
| EAN: | 03134375037693 |
| Application: | Bonding of panels to the frame and reinforcements to the panels, Sealing, Potting and Encapsulation of Electronics, Large Area Lamination Assembly, Joining with small joints, Mounting and Trim, Magnet bonding |
| colour: | Grey |
| area of application: | Advertisement, Wood processing, Metalworking, Special vehicle |
| chemical resistance: | Excellent |
| UV resistance: | Excellent |
| moisture resistance: | Excellent |
| Shape: | Epoxy |
| Joint type: | Permanent |
| Full curing time: | 48 hours |
| Peel strength at 24°C: | 4 N/cm |
| Shear strength at -55°C: | 19 MPa |
| Shear strength at 24°C: | 19 MPa |
| Shear strength at 82°C: | 19 MPa |
| Aggregation: | Liquid |
| Shore hardness: | 85 |
| Viscosity: | Pasta |
| Flammability: | Flammability test according to UL94 HB |
| Shear strength at 121°C: | 17 MPa |
two-part adhesive sample - application, handling
Discussion
Be the first who will post an article to this item!
