1169F Flap disc Cubitron 3, T29 - conical

Code: 7100379365
from €5 / pcs from €4,10 excl. VAT Measure price:

Choose variant

1169F Flap Disc Cubitron 3, T29 - Conical

Detailed information

Grit: P40, Diameter: 115 mm
in stock (10 pcs) | 7100379365
Delivery to: 20.11.2026
€5 / pcs
€4,10 excl. VAT
Grit: P40, Diameter: 125 mm
in stock (108 pcs) | 7100379743
Delivery to: 20.11.2026
€5,60 / pcs
€4,60 excl. VAT
Grit: P40, Diameter: 180 mm
2 weeks | 7100379344
Delivery to: 9.12.2026
€10 / pcs
€8,30 excl. VAT
Grit: P60, Diameter: 115 mm
2 weeks | 7100379507
Delivery to: 9.12.2026
€5 / pcs
€4,10 excl. VAT
Grit: P60, Diameter: 125 mm
in stock (105 pcs) | 7100379654
Delivery to: 20.11.2026
€5,40 / pcs
€4,50 excl. VAT
Grit: P60, Diameter: 180 mm
2 weeks | 7100402380
Delivery to: 9.12.2026
€10 / pcs
€8,30 excl. VAT
Grit: P80, Diameter: 115 mm
2 weeks | 7100379231
Delivery to: 9.12.2026
€5 / pcs
€4,10 excl. VAT
Grit: P80, Diameter: 125 mm
in stock (77 pcs) | 7100379232
Delivery to: 20.11.2026
€5,60 / pcs
€4,60 excl. VAT
Grit: P80, Diameter: 180 mm
2 weeks | 7100400852
Delivery to: 9.12.2026
€10 / pcs
€8,30 excl. VAT

Product detailed description

1169F Flap Disc Cubitron 3, T29 - Conical

  • Provides long-term peak performance and versatility to increase your productivity.
  • It features our new 3M precision grain, which has been redesigned with curved sides, allowing it to cut faster and last longer than conventional abrasive grains.
  • Proven higher performance than traditional aluminium oxide and zirconium flap discs
  • Individual flaps break down to reveal fresh mineral, ensuring a consistent cut rate throughout the service life of the disc.
  • Ideal for use on carbon steel, stainless steel and other heat-sensitive alloys
  • Covers a wide range of applications from weld sanding and beveling to surface preparation.

The 3M Cubitron 3 flap disc 1169F is our highest-performing abrasive disc, characterised by its versatility and high value. Thanks to 3M Precision-Shaped Grain technology, which has been redesigned and now features curved sides, it lasts longer and cuts faster than any other grain, conventional aluminium oxides, and aluminium oxide and zirconium flap discs – all at a reasonable price where productivity and long service life are required for daily use. This unmatched combination of performance and value can increase productivity while reducing your expenditure on abrasives.

Premium performance with built-in versatility: the 3M Cubitron 3 flap disc 1169F is a durable, versatile abrasive disc that offers all the benefits you expect from a flap disc, including adaptability and ease of use with a lower risk of scratching. Thanks to 3M Precision-Shaped Grain (now redesigned with curved sides) and a durable polyester backing, the 3M™ Cubitron(TM) 3 1169F flap disc has a long service life and high durability for medium to high-pressure applications, such as beveling, weld sanding, and deburring. Additionally, it leaves a finish that makes it an excellent choice for applications such as blending and surface preparation. It utilises 3M precision grain, which has been redesigned and now features curved sides. The 3M™ Cubitron(TM) 3 Flap Disc 1169F employs our new patented 3M precision grain design, which continuously fractures into sharp points that cut cleanly through metal, unlike traditional abrasives that tend to wear down the backing. Due to this fracturing, our 3M™ Cubitron(TM) 3 1169F flap disc has an extremely long service life and maintains a high cutting speed throughout its service life. Applications • Weld sanding • Beveling • Edge deburring • Blending • Finishing • Surface preparation • Scale removal • Weld spatter removal Technical tip: In many cases, the 3M™ Cubitron(TM) 3 Flap Disc 1169F allows you to sand and finish in one step, without changing the abrasive. This is because, under normal conditions, the 1169F disc creates a surface that is one grade finer than a fibre disc of the same grade. While a fibre disc cuts faster, this flap disc can eliminate individual steps and disc changes, helping you save time.

Additional parameters

Category: Abrasive Discs
Application: Metalworking, Edge deburring, Weld Removal
Machinery and Equipment: Angle Grinders, Vertical Grinders
Mounting type: Centre bore
Abrasive Material: Precisely shaped grain
Industries: Metalworking, General Industry, Cosmonautics, AOEM, Transport and Heavy Equipment, Maritime and Rail Shipping, Tanks and Containers
Other Industries: Construction Equipment, Industrial Machinery, Agricultural Equipment
Backing Material: Polyester
Binding type: Resin
Cover type: Open casing
Disc type: Type 29
Centre Bore Diameter: 22.23 mm
Sub-application: Surface Levelling, Chamfer grinding, Sanding of Welds, Weld Removal and Finishing, Reducing roughness after flame cutting, Coating preparation
Disc density: Standard

Discussion

Be the first who will post an article to this item!

Do not fill out this field

Security check

Vložením komentáře souhlasíte s podmínkami ochrany osobních údajů