1099 Scotch-Weld nitrile rubber-based adhesive for bonding vinyls and other plastics, 150 ml tube
Code: 7000079905Product detailed description
Scotch-Weld 1099 Nitrile Rubber-Based Adhesive - Bonding Of Vinyls And Other Plastics, 150 ml Tube
3M™ 1099 high-performance nitrile plastic adhesive dries quickly and provides an open time to tack of approximately 40 minutes. The bonded joints it creates are strong and durable against weather conditions and damage caused by water, oils and fuels. Furthermore, it adheres well to plastics and vinyl, achieving long-term adhesion and good resistance to plasticiser migration.
Ideal for vinyl plastics: 3M™ 1099 high-performance nitrile plastic adhesive can be applied to a wide variety of substrates, primarily leather, most vinyl films used in awnings and upholstery, artificial leather and plastics, where it creates a strong and durable joint. However, it may leave stains on thin or light-coloured vinyl. Recommended use Bonding to most vinyls and plastics (bonding to polyolefin plastics is not recommended) Automotive repairs including assembly of panels and upholstery Advertising displays and awnings General industrial sectors Repair, maintenance and renovation Accelerating the bonding process With high-performance 3M™ 1099 nitrile adhesive for plastics, you can quickly meet your bonding requirements. This fast-drying adhesive creates a durable joint at room temperature, the strength of which can be increased based on a heat-induced chemical reaction. Furthermore, it can be applied by spray using industrial spraying equipment, allowing for a convenient and consistent application. Adhesive application: Whether you apply 3M™ adhesive by spray, brush or roller, it is a simple process. Begin by applying the adhesive to the surface to create a uniform layer. With an overlapping pattern, a single coat should suffice for most surfaces. Effective adhesive coverage means that at least 80% of the area is covered. Some materials, such as porous ones, may require an additional coat. To apply an additional coat, simply wait for the existing adhesive to dry, which can be determined by touch. You may then proceed with applying the additional coat.
- The high-performance adhesive creates strong joints on most vinyls and plastics.
- Durable against weather conditions, water, oil, plasticiser migration and fuels
- Creates strong, fast-drying and flexible joints
- Optional heat curing increases the strength of the bonded joint
- Option for spray application using industrial spraying equipment
Application: Large area lamination assembly
Working time: Up to 40 minutes
Physical form: Medium Syrup
Weight percentage of solids (approximate): 31 to 37 Percent
Colour family: Beige
Solvent: Acetone
Application temperature to (Celsius): 120.0 Degrees Celsius
Application temperature from (Celsius): -40.0 Degrees Celsius
System: solvent-based
Base: nitrile rubber
Temperature resistance: 80 (200 after heat curing) °C
UV resistance: excellent
Moisture resistance: excellent
Chemical resistance: excellent
Application: spraying
Additional parameters
| Category: | Adhesives |
|---|---|
| EAN: | 03134375326896 |
| Application: | Bonding of plastics, rubber and leather to other materials |
| chemical resistance: | Excellent |
| UV resistance: | Excellent |
| moisture resistance: | Excellent |
| temperature resistance: | -21°C to 200 °C |
| Shape: | Nitrile rubber |
| Joint type: | Permanent |
| Application method: | Spraying, rolling, brushing |
| Flammable fuel: | Yes |
| Flammable solvents: | Yes |
| Aggregation: | Thin syrup |
| Ignition point: | -15 °C |
| System: | Solvent-based |
Discussion
Be the first who will post an article to this item!
