10039A clear protective film 3M for rough surfaces 50mmx350m

Code: 3M.42.0015
€60 / pcs €49,60 excl. VAT Measure price:
in stock (1 pcs)
Delivery to:
20.11.2026
Delivery options

3M 10039A Clear Protective Film - Rough Surfaces, 50mmx350m

Detailed information

Product detailed description

3M 10039A Clear Protective Film - For Rough Surfaces, 50mm x 350m

Use

- rough metal surfaces

- rough plastic surfaces

- rough synthetic fibre surfaces

- synthetic fibre carpets (short pile)

- carpets, natural and synthetic fibres (long pile)

Technical information

Width: 100 mm
Roll length: 350 m
Thickness: 0.109 mm
Colour: transparent
Adhesive: acrylic
Adhesion to steel (N/cm): 3.9±1.0 N/cm
Carrier: polyethylene
Maximum shelf life: 18 months
General Information

3M surface protective films and tapes protect products from contaminants, dust and damage during assembly, maintenance, warehousing and transport. The adhesive used has low adhesion, allowing the protective film or tape to be not only easily applied but also removed without leaving residue. 3M offers a wide product range of these films and tapes for a variety of applications.


Preparation
To achieve optimum adhesion, the substrate must be clean and free from dust, oil, grease, solvents, etc.


Usage
Apply and remove at temperatures between 10°C and 40°C.


warehousing
Protective films and tapes should be stored at temperatures between 10°C and 40°C, and a relative humidity of 50%.

Application
Protects against scratching
Protects against the effects of dust, damage and abrasion
Protects surfaces during repairs, assembly, processing and shipping
Reduces factors contributing to surface ageing
Protects against colour fading caused by UV radiation
Extends the service life of the product
Protects the product during warehousing

Discussion

Be the first who will post an article to this item!

Do not fill out this field

Security check

Vložením komentáře souhlasíte s podmínkami ochrany osobních údajů