05888 3M Plastic repair set, repair car bumpers using a flexible plastic patch

Code: 7000080199
€48,20 / pcs €39,80 excl. VAT Measure price:
in stock (5 pcs)
Delivery to:
20.11.2026
Delivery options

3M Plastic Repair Set 05888 - Repair Car Bumpers Using A Flexible Plastic Patch

Detailed information

Product detailed description

05888 3M Plastic Repair Set, Repair Car Bumpers With Flexible Plastic Patch

The 3M™ Instant Plastic Repair Patch is a 200 mm x 100 mm thermoplastic patch, backed with 3M™ high-performance acrylic foam tape.
The 3M™ Instant Plastic Repair Patch is used to easily repair damaged plastic parts, while the repair requires reinforcement of the back side (i.e. a hole or crack). When applying the patch, there is no need to sand or wait for curing.

When used in conjunction with 06396 Patch Adhesion Promoter, it provides instant adhesion to most plastics, allowing for quick and easy reinforcement of the back side
of the repair. The front side repair can follow immediately without waiting using 3M™ plastic repair materials.

  • The patch is used to reinforce the back side of repaired bumpers
  • No waiting for curing is required to start repairs on the exterior
  • Used on plastics that need reinforcing
Application:
Plastic repair
Surface defect repair
Consistency: Tape
Adhesive type: Acrylic
Product type: Plastic repair set
Brand: 3M™

Black colour
Solids Content (typical): 100 %
Temperature resistance: -10°C to +85°C
Temperature of application: +15°C to +35°C
Storage conditions +5°C to +35°C.
Application instructions:
1. Clean the part
- Remove the part from the vehicle.
- Clean the front (A) and back side (B) with a high-pressure cleaner
or soap and water.
- Let dry.
2. Prepare the repair area
- Drill a hole with a diameter of 4 to 6 mm at the end of the crack
stress and prevents further spreading of cracks.
- If the crack reaches the edge of the part, grind a V-notch
crack edges (see arrow) to prevent the crack from spreading
later in the process.
- Sand the front side (P80 - P180) to remove all colour around
the repair area.
3. Prepare the crack area
- Cut out the front side of the crack area to maximise
the bonded surface and achieve optimal repair durability.
- Prevent heating and melting of the plastic during sanding.
Remove traces of melted plastic with a knife or solvent
sanding.
- Avoid creating sharp edges (see drawing), which could cause
the repair to remain visible even after painting.
- Blow out the repaired area using clean, oil-free compressed
air.
4. Internal Preparation – Adhesion Promoter Application
- Clean both sides using 3M™ 22779 VHB™ Surface Cleaner
or 3M™ 08984 cleaner.
- Wipe the repair area on the back of the part, where the
patch will be placed, with 3M™ 06396 Patch
Adhesion Promoter.
- Allow to dry for 5 minutes.
Note: if there is any paint overspray on the back
side, it is important to remove it (P320 sanding or cleaning using
Scotch-Brite™ + 08984) before applying the adhesion
promoter and patch. Failure to remove colour overspray
creates a weak link, which can reduce patch adhesion.
5. Repair Application
- Cut the patch to the required size with scissors or a knife, leaving 2 to 3 cm
around the crack or hole.
- Remove the red liner.
- Apply to the repair area. Press firmly to achieve immediate
adhesion.
- Excess patch on the edge can be trimmed with a knife.
The rear side repair is complete.
6. Front Side Repair
- Complete the repair on the front side as per usual
methods with 3M™ plastic repair material.
- For final edge finishing, the 3M™ 05888 patch can be sanded
during filler sanding to achieve a perfect appearance.
- Primer coat and topcoat according to your colour supplier's
recommendations.

Additional parameters

Category: Vehicle Repair and Paint Products
EAN: 04046719284511
Application: Repair car bumpers using flexible plastic patches
colour: Black
area of application: Automotive, Car Repair
chemical resistance: Excellent
UV resistance: Excellent
moisture resistance: Excellent
Shape: Acrylic

Discussion

Be the first who will post an article to this item!

Do not fill out this field

Security check

Vložením komentáře souhlasíte s podmínkami ochrany osobních údajů